674833
12
Zoom out
Zoom in
Previous page
1/14
Next page
20 21
Troubleshooting
Problem Solutions
RoboVac cannot be
activated.
• Make sure the power switch is in the ON position.
• Ensure the battery is charged.
• Replace the batteries in the remote control (2 AAA batteries).
• Make sure the remote control is within range (less than 3m
from RoboVac).
The remote control
does not work.
• Replace the batteries in the remote control.
• Point the remote control directly at RoboVac.
• Make sure RoboVac is turned on and fully charged.
RoboVac stops
working suddenly.
• Check whether RoboVac is trapped or stuck on an obstacle.
• Check whether the power level is too low.
You cannot schedule
cleanings.
• You can set the time and scheduled cleaning time via the
EufyHome app.
• Make sure the scheduled time has been set correctly.
• Check whether RoboVac’s power is too low to start cleaning.
• Cleaning schedules are erased when RoboVac is powered o.
If RoboVac is powered on without Internet access, cleaning
schedules will not synchronize and must be reset via the app.
Suction power is weak.
• Check whether any obstructions are blocking the suction inlet.
• Empty the dust collector.
Clean the filter with a vacuum cleaner or a cleaning brush.
RoboVac cannot be
charged.
• Check whether the Charging Base is plugged into the outlet.
• Remove objects within 3 ft/1 m to the left and rignt side and
within 6 ft/2 m of the front of the Charging Base.
• Dust o the charging contact pins with a dry cloth.
The rolling brush
does not rotate.
• Clean the rolling brush.
• Check whether the rolling brush has been installed properly.
RoboVac’s movements
or travel path are
abnormal.
• Clean the sensors carefully with a dry cloth.
• Restart Robovac by turning the power switch o and on.
You cannot control
RoboVac with Alexa.
• Check whether you have installed the Alexa app onto your
smart device and enabled “EufyHome - RoboVac” Skill in the
Alexa app. For details, refer to this section “Use Your RoboVac
with Amazon Alexa (Optional)”.
• Make sure you have an EufyHome account.
• Check whether you say to Alexa with correct commands.
• The “EufyHome - RoboVac” Skill for Alexa is only available in
English now.
Error Codes
When RoboVac is in trouble, it will emit a series of short or long beeps and the red indicator
on RoboVac will be on or flashing.
Flashing red indicator light
Error Tone Cause Solution
One beep
RoboVac is hanging over a ledge
or is trapped.
Turn o RoboVac and restart in a new location.
Two beeps RoboVac’s bumper is stuck.
Tap RoboVac’s bumper several times to dislodge
any debris that may be trapped underneath.
Three beeps RoboVac’s drop sensors are dirty. Clean the drop sensors gently with a dry cloth.
Four beeps
RoboVac’s power level is too low. Manually charge RoboVac for at least 5 hours.
Solid red indicator light
Error Tone Cause Solution
One beep RoboVac’s wheel is stuck.
Turn o RoboVac and remove any hair or
debris from the wheel.
Two beeps RoboVac’s side brush is stuck.
Turn o RoboVac and remove any hair or
debris from the side brush.
Three beeps RoboVac’s suction fan is stuck.
• Turn o RoboVac, then remove and empty
the dust collector.
• Make sure the air inlet is not blocked by
any hair or debris.
Four beeps
RoboVac’s rolling brush is stuck.
Turn o RoboVac and remove any hair or
debris from the rolling brush.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eufy RoboVac 11C - T2103 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eufy RoboVac 11C - T2103 in the language / languages: English as an attachment in your email.

The manual is 3,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info