Manual Eufab 21076 - AC010313D (page 8 of 24) (English, German, Dutch, French, Italian)

807583

Zoom out

Zoom in

1/24

In order to be able to work with the compressor,  rst take the

air hose (Position 6 in the overview) and the connection cable

(Position 5 in the overview) from the storage compartment

(Position 7 in the overview).

6.2 OPERATING THE COMPRESSOR

Make sure that the compressor is switched o

before connecting it (both switches, Positions 3

and 4 in the overview, may not be pressed).

Open the lock of the valve connection (Figure 5). Insert the

appropriate adapter for the required purpose into the valve

connection. Lock the valve connection (Figure 7). Insert the

adapter into the  lling connection of your leisure equipment

(ball, in atable toys etc.). Depending on version, it is possible

that the adapter will need to be held  rmly during the  lling

process. Now you can switch on the compressor and start

the  lling process. When the desired air pressure is reached,

switch o the compressor by pressing the appropriate On/

O switch. Remove the adapter from the valve connection by

proceeding in reverse order, as described above.

Connect the compressor to the power supply. Either to the

12 V connection in your vehicle or to a 230 V household

connection.

Switch the compressor on to  ll. When connecting to a 12 V

vehicle socket, press the right switch (Position 3 in the

oveview) on the front of the device. When connecting the

compressor to the 230 V household network, press the left

switch (Position 4 in the overview).

After  lling a tyre, check the tyre pressure again using a

separate air pressure tester (e.g. at a  lling station, vehicle

workshop).

The manometer (Position 2 in the overview) is designed to

monitor the air pressure. When the desired air pressure is

reached, switch o the compressor by pressing the appropria-

te On/O switch. Remove the valve connection in reverse order

(Figures 8-5).

Open the lock on the valve connection

Lock the valve connection

Place the valve connection on the valve

You can now  ll the tyre using the compressor

CAUTION

When  lling, always pay attention to the

correct air pressure (consult the operating

instructions of your vehicle for informati-

on). The compressor is able to supply a pres-

sure of up to 8.3 bar. If the pressure is too

high, there is a risk of explosion and injury.

Never allow the compressor to operate for

longer than 5 minutes without a pause,

otherwise there is a risk of overheating.

Switch the compressor o after 5 minutes of

use and allow it to cool down fully (at least

20 minutes) before starting it up again.

Never leave the compressor to operate

unattended.

The compressor may discharge the battery

of your vehicle if the motor is switched o .

If you use the compressor with the vehicle

motor running, ensure good ventilation in

the garage or hall. There is a risk of poiso-

ning!

6.2.2 USING THE ADAPTER

6.2.1 FILLING A TYRE USING THE CAR VALVE

SCHRADER VALVE

Figure 5

Figure 7

Figure 6

Figure 8

Do not connect the compressor to both the

230 V household connection and the 12 V

socket of your vehicle at the same time.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Eufab 21076 - AC010313D in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0.91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Eufab 21076 - AC010313D Manual

Product: