Manual Eufab 11584 Finch (page 9 of 20) (English, German, French, Italian)

807054

Zoom out

Zoom in

1/20

When the rack is  rmly seated on the trailer hitch, rotate the securing bolt of

the quick locking mechanism until it engages. Now close the quick locking

mechanism with the supplied padlock and remove the key from the lock.

Store the key carefully and in a safe place. The bicycle rack is now secured

to prevent theft.

Insert the plug of the electrical cable of the bicycle rack into the trailer

socket of your vehicle. Perform a lighting test.

CAUTION

Slight signs of pressure on the hitch ball are normal

and do not in uence the functionality.

Always make sure that the lock nut of the adjusting

screw is correctly tightened!

Figure 6: Step 1

Figure 7: Step 2

Unfold the bicycle rack for use as shown in the following Figures.

5.4 UNFOLDING THE BICYCLE RACK

Figure 8: Step 3

Make sure that the locking mechanism of the license plate holder, Figure 9

Position B, engages correctly.

Figure 9: Locking mechanism

Open all the tension belts on the wheel rails by pressing down on the lock at

the rear and then pulling out the tension belt completely, Figure 10.

5.5 MOUNTING THE BICYCLE RACK WITH BICYCLES

Figure 10: Open the tension belts

Position the  rst bicycle, if possible - the heaviest, in the  rst wheel rail

(the wheel rail closest to the vehicle). Connect the frame of the bicycle to

the U-bracket using the short frame holder. Rotate the knob nut anti-clock-

wise until the frame clip has opened su ciently to accommodate the bicy-

cle frame. Insert the bicycle frame into the frame clip. Rotate the knob nut

clockwise until the frame clip loosely encompasses the bicycle frame. Align

the bicycle and the frame holder to ensure that it all  ts together.

Place the second bicycle in the second wheel rail, facing the opposite direc-

tion to the  rst. Connect the frame of the second bicycle to the U-bracket

using the long frame holder. Rotate the knob nut anti-clockwise until the

frame clip has opened su ciently to accommodate the bicycle frame. In-

sert the bicycle frame into the frame clip. Rotate the knob nut clockwise

until the frame clip loosely encompasses the bicycle frame. Align the bicyc-

le and the frame holder to ensure that it all  ts together. Make sure that the

two bikes do not collide with each other.

Now tighten the knob nuts  rmly.

You can only lock the frame holder when it has been

closed securely.

The frame holder may cause minor pressure points

on the bicycle frame and damages to the paintwork.

Protect the bicycle frame, for example, using

protective  lm

Insert the key into the lock of the knob nut and turn so that the red marking

faces the lock icon. Remove the key. Your bicycle is now secured to prevent

theft.

Place the tensioning belt of the wheel holder around the rim of the

wheel and insert the tensioning belt into the anchor clip. Pull hard on the

tensioning belt, Figure 11.

Additionally secure the front wheel against twisting with a short tension

strap.

Figure 11: Tensioning belt

To fold up the bicycle rack,  rst release the locking mechanism of the licence

plate holder. To do this, pull the hand lever, Figure 9 Position A, to the centre

of the licence plate. Then follow the steps described above in reverse order.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Eufab 11584 Finch in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1.16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Eufab 11584 Finch Manual

Product: