Manual Eufab 11584 Finch (page 8 of 20) (English, German, French, Italian)

807054

Zoom out

Zoom in

1/20

Figure 1: Installation of the rear lights

Figure 2: Installation of the rear lights

Use a wide screwdriver or a coin to turn the holders on the lower edge

of the licence plate holder so that the retaining tabs point downwards,

Figure 3. Place the licence plate from below under the holding lugs in the

upper frame. Press the licence plate into the licence plate holder so that it is

completely within the frame. Turn the holding lugs upwards again, Figure 4.

5.2 INSERTING THE LICENSE PLATE

Figure 3: Open the holder

Figure 4: Close the holder

Before you put the bicycle rack on the trailer hitch, familiarise yourself with

the quick locking system, Figure 5.

Ensure that the trailer hitch is undamaged, clean and free of grease.

Remove any paint from the hitch.

The quick locking mechanism is a component with a lever. Activating the

lever opens or closes the quick locking mechanism. With the help of the

securing bolt and the padlock, the quick locking system may be locked and

secured.

5.3 MOUNTING THE BICYCLE RACK ON THE TRAILER HITCH

Figure 5: Quick closure

Set bolt Lock nut

Set bolt Safety pin

Lock

Lock nut

Lock

Lever

The padlock is always required when using the bicycle

rack. The bicycle rack may only be used if the padlock

is employed correctly and locked. The lock is safety-

relevant.

Park your vehicle on a level surface.

Switch the motor o and pull on the brake.

Remove the securing bolt from the quick locking mechanism and rotate by

90° to prevent it from engaging again. Open the quick locking mechanism

by lifting the lever.

Place the bicycle rack, from above, horizontally onto the trailer hitch. Align

the bicycle rack horizontally and straight behind the vehicle. Push the

lever of the quick locking mechanism down (force required is approximately

35 - 40 kg) as far as it will go (the lever will remain in the horizontal

position).

Check whether the bike rack is securely and  rmly positioned on the trailer

hitch and can no longer be rotated. If this is not the case, the quick locking

mechanism must be readjusted. Lift the lever and remove the rack from the

trailer hitch. Remove the protective cap of the adjusting screw. Undo the

lock nut of the adjusting screw and rotate the adjusting screw on the quick

locking mechanism tighter by a quarter turn. Then tighten the counter nut

again.

Replace the rack back on the trailer hitch and check whether the rack is

securely and  rmly positioned on the tow bar. Repeat the adjustment

process until the rack is secure and  rm.

Insert the protective cap back onto the adjustment screw.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Eufab 11584 Finch in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1.16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Eufab 11584 Finch Manual

Product: