565941
13
Zoom out
Zoom in
Previous page
1/240
Next page
© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT
Installation/Operation Supplement
11
511472 (EN)
Gas Requirements
NOTE: This manual is only a supplement. Refer to
installation/operation manual for full instructions.
Gas Dryers
(6.2 kW)
Gas Rate = 0.55 m
3
/hr
NOTE: This appliance must be installed in
accordance with regulations in force.
NOTE: This machine is supplied from the factory
for operation on Natural Gas [2nd Family, Group H
(E)] at nominal inlet pressure of 20 mbar for use in
the countries of GB/IE/PT/ES/IT. For installation in
other EU Countries, and/or for conversion to
L.P. (Liquefied Petroleum) gas, consult the
distributor. DO NOT connect the dryer to L.P. gas
without consulting the distributor and/or without
performing the proper conversion according to the
conversion instructions (Conversion Kit 599P3).
The unit must be isolated from the gas supply piping
system by closing the equipment shut-off valve during
any pressure testing of the gas supply piping system at
test pressures equal to or less than 50 mbar.
Natural Gas Altitude Adjustments
Altitude Orifice Size
Part No.
mft.#mmin.
915 3000 43 2.26 0.0890 503778
1830 6000 44 2.18 0.0860 58719
2440 8000 45 2.08 0.0820 503779
2740 9000 46 2.06 0.0810 503780
3050 10,000 47 1.99 0.0785 503781
Table 1
To reduce the risk of gas leaks, fire or
explosion:
The dryer must be connected to the type
of gas as shown on nameplate located
in the door recess.
Use a new flexible stainless steel
connector.
Use pipe joint compound insoluble in
L.P. (Liquefied Petroleum) Gas, or Teflon
tape, on all pipe threads.
Purge air and sediment from gas supply
line before connecting it to the dryer.
Before tightening the connection, purge
remaining air from gas line to dryer until
odor of gas is detected. This step is
required to prevent gas valve
contamination.
Do not use an open flame to check for
gas leaks. Use a non-corrosive leak
detection fluid.
Any disassembly requiring the use of
tools must be performed by a suitably
qualified service person.
W316
WARNING
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eudora T11 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eudora T11 in the language / languages: English, German, Dutch, French, Italian, Swedish, Turkish, Spanish, Norwegian as an attachment in your email.

The manual is 6,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info