582329
12
Zoom out
Zoom in
Previous page
1/32
Next page
12 457
i
gb
Controllare che la tensione dell’impianto elettrico corrisponda a quella indicata sulla
targhetta caratteristiche posta sul lato sinistro in basso nella parte interna dello scom-
parto frigorifero.
Se la presa a muro è priva di contatto a terra, o se la spina non è adatta al vostro
impianto vi consigliamo di rivolgervi ad un elettricista specializzato.
Non impiegare adattatori o derivatori che potrebbero causare riscaldamenti e bru-
ciature.
Gli apparecchi previsti per il funzionamento a 115V - 60 H:
(sprovvisti di cavo di alimentazione e di spina) devono essere collegati ad una rete di
alimentazione elettrica dotata di un dispositivo che assicuri la disconnessione
onnipolare dell’apparecchio dalla rete stessa, con una distanza di apertura dei con-
COLLEGAMENTO ELETTRICO
Check that the main voltage corresponds to that indicated on the rating plate in the
lower left side inside the refrigerator compartment.
If the wall socket does not have an earth terminal, or if the plug does not fit into the
socket, it is advisable to consult a qualified electrician. Do not use multiple plugs or
adapters as they could cause heating and burning.
Warning: this appliance must be earthed
If this appliance is fitted with a non rewirable plug for which your socket is unsuitable,
the plug should be cut off and an appropriate plug fitted. The removed plug must be
disposed of Insertion of the plug into a 13 Amp socket is likely to cause an electrical
hazard When a nonrewirable plug ora rewirable 13 Amp (BS1363) plug is used it
must be fitted with a 13 Amp ASTA approved (BS1362) fuse. If any other type of plug
is used it must be protected by a 15 Amp fuse either in the plug or at the distribution
board
Important: The wires in the main leads are coloured in accordance
with the following code:
ELECTRICAL CONNECTION
GREEN AND YELLOW - EARTH BLUE - NEUTRAL
BROWN - LIVE
As the colours of the wires in the main lead of your appliance may not correspond
with the coloured marking identifying the terminals in your plug, proceed as follows.
CONNECT GREEN & YELLOW coloured wire to plug terminal marked letter “E” or
earth symbol or coloured green or green & yellow.
CONNECT BLUE coloured wire to plug terminal marked letter “N” or coloured black.
CONNECT BROWN coloured wire to plug terminal marked letter “L“ or coloured
red.
Those appliances designed to operate at 115 V - 60 Hz (not pro-
vided with a power supply cable and plug) must be connected to an
electricity mains supply provided with a device which ensures the
omnipolar disconnection of the appliance from this mains supply,
with a contact break of at least 3 mm (e.g.: bipolar thermal mag-
netic circuit-breaker, bipolar differential circuit-breaker, etc.).
Green and Yellow
to Earth
Blue to
Neutral
13 amp
Fuse
Brown
to Live
Cord
Clamp
tatti di almeno 3 mm. (es.: interruttore magnetotermico bipolare, interruttore differen-
ziale bipolare, ecc. ).
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eudora BDA Elin KS A 1454 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eudora BDA Elin KS A 1454 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info