Manual Eudora BDA Elin KS A 1454 (page 10 of 32) (English, German, French, Italian, Portuguese, Spanish)

582329

Zoom out

Zoom in

1/32

10 457

ISTRUZIONI PER L’USO

POSITIONING AND ISTALLATION

Mod. 2

Mod. 1

Reversibilità apertura porte

Tutti i modelli sono, predisposti per l’inversione dell’apertura delle porte, per un più

coordinato allineamento con l’arredo cucina. Per effettuare l’inversione delle porte, pro-

cedere nel seguente modo: dopo aver coricato il frigorifero dalla parte dello schienale,

usando appositi spessori per evitare lo schiacciamento del condensatore e il danneg-

giamento del gruppo compressore procedere nel modo seguente:

MODELLO 1

A. Smontare la cerniera (2) in modo di liberare la porta (3).

B. Svitare le due viti che fissano la cerniera intermedia (4) e liberare la portina (5).

C. Svitare il perno (6) e montarlo sulla cerniera sinistra.

D. Togliere, in ambedue le porte, le bussole e relativi tappi dai rispettivi fori e rimon-

tare il tutto sul lato opposto (bussole a sinistra, tappi a destra).

E. Quindi rimontare la porta superiore (5).

F. Fissare la cerniera intermedia (4) unitamente alla piastrina in plastica sottostante

dalla parte opposta per bloccare la portina.

G. Rimontare la porta invertendo la posizione della bussolina (7).

H. Montare la cerniera inferiore messa in dotazione per bloccare la porta.

MODELLO 2

A) Smontare la cerniera inferiore (1) in modo da liberare la porta. Smontare il perno

(4) e il piedino livellatore (2). Smontare la bussola (5) e rimontarla all’altro lato

della porta. Rimuovere il piedino livellatore (3) e rimontarlo sullo stesso foro del

lato opposto.

B) Svitare il perno superiore (6) e rimontarlo sulla cerniera opposta, smontare la

bussola (7) e rimontarla sull’altro lato.

C) Rimontare la porta.

D) Dopo aver opportunamente girato la cerniera (1 ) rimontare il perno (4), quindi

rimontare il piedino (2) nella stessa sede cerniera, dal quale e stato opportuna-

mente rimosso. Bloccare quindi la cerniera inferiore con le 2 viti.

REVERSING THE DOOR SWING

All the models are equipped with | reversible doors so the door opening can be changed

to match your kitchen furnishings. To change the door swing, proceed as follow: set the

refrigerator on its back on i the floor. | Protect the condenser and compressor unit from

being damaged by inserting spacers between the appliance and the floor

MODEL 1

A. Remove the hinge (2) and the door (3).

B. Remove the two screws which fasten the centre hinge (4) and remove the door (5).

C. Unscrew the pin (6) and mount it on the left hinge.

D. From both doors remove the bushings and relative caps and reinstall them on the

opposite side (bushings to the left, caps to the right). E Reinstall the top door (5). 6

F. Fasten the center hinge (4) together with the plastic shim underneath on the |

opposite side to hold the freezer door in place.

G. Reinstall the door When doing so, reverse the position of the bushing (7)

H. Install the bottom hinge in order to hold the door in place.

MODEL 2

A) Dismount the bottom hinge (1) to free the door. Dismount the pin (4) and the

levelling foot (2). Remove the bushing (5) and fit on the opposite side of the door.

Remove the levelling foot (3) and fit on the hole on the opposite side.

B) Unscrew the top pin (6) and fit on the hinge of the opposite side. Dismount the

bushing (7) and fit on the opposite side.

C) Remount the door

D) Turn the hinge (1), fit the pin (4) and the foot (29 in the same hinge housing i from

which it was previously removed Fix the bottom hinge using the 2 screws.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Eudora BDA Elin KS A 1454 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Eudora BDA Elin KS A 1454 Manual

Product: