2 | 10
INT ENDE D U S E
• Etrel INCH LITE charging station is intended only for
charging of electric vehicles and should not be used
to charge other appliances or for any other
purpose.
• The manufacturer accepts no responsibility for
damage or injuries resulting from incorrect
installation or inappropriate use.
INS TA LLATI O N AN D MAI NT EN ANC E
• Do not install charging station near flammable,
explosive, or combustive materials.
• Charging station installation must be performed in
dry weather conditions.
• Electrical installation, wiring, and connections
must be carried out by qualified electrician or
technician in accordance with all local electrical
codes, legislation, and ordinances.
• Warning! Before installing and wiring the
charging station, make sure that the power
supply is disconnected: remove fuses or
deactivate the circuit breaker to protect from
unintentional powering of the device.
• Charging station can be installed, maintained, and
repaired by qualified personnel only.
• Charging station’s power supply should always be
switched off during the maintenance and repair.
• Avoid hazardous risks. Only the manufacturer, an
authorized service technician, or technically
qualified personnel may replace damaged charging
station or its components.
OP ERAT ION
• Do not operate your charging station if there is
visible damage to the unit or charging cable. Call
manufacturer’s or reseller’s support department
for advice how to proceed.
• Do not put fingers into the charging connector.
