802073
10
Zoom out
Zoom in
Previous page
1/12
Next page
8 | 10
Mount Charging Station on Holder and Screw the Cable
Gland on the Enclosure
Mount the station on the holder which is already
attached to the mounting bracket. Holder is strong
enough to hold the charging station during the
installation of cables.
Place the gland plate in its position so that the plate
holes are aligned with holes of the enclosure. Make sure
that cables are long enough to be connected. Screw in
the gland plate using a Phillips-head screwdriver.
Secure Grounding Wire
Secure the grounding wire first. Otherwise there will not
be enough space to do it later.
Insert the Fork Wire (Only if RCD in the Charger)
To enable the tripping of RCD protection, insert the
additional wire with fork into the slot for neutral
conductor like shown on the figure. This applies only if
RCD is installed in the charging station.
Connecting the Connection Element
Remove the sticker with designation of conductors.
Insert all the wires into the RCD/overcurrent/MID meter
unit. Order of the wires and how they are connected is
important.
The top connector is the first phase (L1) of the charging
station, and it will be used to charge single-phase EVs. It
is advisable that the least loaded phase of the facility is
used for this. Bottom connector should be used to
connect neutral wire (N). Keep the sequence of phases.
The right sequence of phases is especially important
when charging station is part of a cluster.
After you connect the wires, tighten the screws so that
the wires cannot be pulled out and sufficient electrical
contact is achieved.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etrel Inch Lite at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etrel Inch Lite in the language / languages: English as an attachment in your email.

The manual is 0.3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Etrel Inch Lite

Etrel Inch Lite User Manual - English - 19 pages

Etrel Inch Lite User Manual - German - 19 pages

Etrel Inch Lite Quick start guide - German - 12 pages

Etrel Inch Lite User Manual - Dutch - 21 pages

Etrel Inch Lite Quick start guide - Dutch - 12 pages

Etrel Inch Lite User Manual - French - 21 pages

Etrel Inch Lite Quick start guide - French - 12 pages

Etrel Inch Lite Quick start guide - Italian - 12 pages

Etrel Inch Lite User Manual - Spanish - 19 pages

Etrel Inch Lite Quick start guide - Spanish - 12 pages

Etrel Inch Lite Additional guide - All languages - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info