Manual Etrel Gen 6 (page 39 of 54) (English)

802074

Zoom out

Zoom in

1/54

7. After the initialisation of the station is successfully completed, the LCD display should

show the message: » CHARGING STATION AVAILABLE Log in to start charging". In the

event that the station is not properly configured or the main controller fails to establish

the connection with some of the modules or the Control centre, the status of the station

changes to » Station is not working«. If the station fails to initialise after following the

above procedure, contact the manufacturer's technical support service.

8. Test the functioning of the station. Plug in a cable into socket 1, after which the station

should request identification. Identify with a test RFID card. The card needs to be

registered in the user database. After successful identification, the charging should start

automatically. If the RFID test card is not a part of the user database, the charging

station will return the message »Unknown user«. If the identification process takes

longer than usual and the station returns the message » Error occurred while logging in.

Please try again.«, this indicates that the connection with the Control centre could not

be established and the user could not be identified. The cause of a non-functioning

connection can be one of the following: a) incorrectly configured communication

connections between the charging station and the Control centre, b) incorrectly set up

connection to the Control centre in the station's configuration, c) malfunctioning of the

communication interface in the Control centre. The status of a socket can change to

»Socket is not working« if the communication between the energy meter and the main

controller is not functioning. The same status can be reported if there is no voltage in

the socket after the command to turn on the contactor has been given or vice versa (if

there is voltage even when no command to turn on the contactor has been given).

9. Following the same procedure, test the functioning of the second socket.

10. After the station has been initialised and tested, the electrician should contact the

Control centre operator to verify the state of the charging station, list of charging events

and the list of charging sessions.

6.2 Configuration of the charging station

Every newly installed charging station requires an appropriate configuration. According to the

manufacturer's recommendations, the configuration should be performed in the station

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Etrel Gen 6 in the language / languages: English as an attachment in your email.

The manual is 1.77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Etrel Gen 6 Manual

Product: