802074

Etrel Gen 6 Manual

32
Zoom out
Zoom in
Previous page
1/54
Next page
31
5 Installation and connection of the charging station
5.1 Installation of the station on the foundation
After the foundation with the built-in anchoring structure and installation pipe is constructed,
the charging station can be installed on the foundation. The foundation must be left to dry for
at least two days before the cable routing and installation works can begin.
The casing of the station is fixed to the bolts on the underground anchoring structure after the
screws on these same bolts have been temporarily removed. After the charging station is
placed on the foundation, all of the bolts must extend through the bottom plate of the casing. A
ring spanner is used to fix the station to the foundation using the previously removed screws.
Some of the bolts may require the use of a ring spanner with an offset handle. Care must be
taken not to damage the thread of the bolts on the foundation while fixing the charging station.
After the installation of the casing on the bolts, one of the bolts is used to attach the grounding
cable shoe.
5.1 Cabling route for the connection of multiple charging stations
The charging station can be installed independently or combined in connection with other
stations (the so called clustering of charging stations).
Figure 16: Cabling route for multiple charging stations
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etrel Gen 6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etrel Gen 6 in the language / languages: English as an attachment in your email.

The manual is 1.77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info