Manual Etrel Gen 6 (page 20 of 54) (English)

802074

Zoom out

Zoom in

1/54

Figure 7: Insertion of anchor rods into the upper frame

3. Place the L profile on the bottom of the anchor. Place all tree rods in one line into the L

profile holes and screw nuts also on the bottom of the L profile, where the rod enters

through the L profile. Tighten upper and lower nut firmly. Repeat for the second L

profile.

Figure 8: Insertion of anchor rods into the bottom L profile

The underground anchoring element is built into concrete foundation. The preparation of the

foundation (its dimensions) depends on the structure of the ground on the designated location.

The underground anchoring element can be combined with reinforcing steel. It is

recommended to add construction steel into the L profile side holes to strengthen the anchor.

You can use up to FI 12 construction steel.

Please note that the upper part of the underground anchoring element has a rounded corner at

its front left side. It should therefore be installed so that this round corner is matched by the

front left side of the charging station in final installation set-up.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Etrel Gen 6 in the language / languages: English as an attachment in your email.

The manual is 1.77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Etrel Gen 6 Manual

Product: