802074

Etrel Gen 6 Manual

13
Zoom out
Zoom in
Previous page
1/54
Next page
12
3.4 Placement of the charging station in the environment
3.4.1 Required space
Basic installation of the charging station requires a space of approximately 650 mm x 390 mm.
If the charging station is installed together with safety arches, dimensions of the required space
are approximately 850 mm x 450 mm. Required dimensions are calculated as follows:
• Basic dimensions of the station's base: 350 mm x 200 mm.
• Free space:
- 50 mm in the back
- 150 mm on the left and right side
- 140 mm at the front in order to open the station doors
• Two air vents are built into the station, one on the top of the back side and another in
the middle of the back side. Air vents must not be blocked or obstructed by other items
or objects. When applicable, air vents must be protected from being covered with snow.
• The height of the charging station is 1300 mm.
The charging station is equipped with standard sockets. Charging cables are not a part of the
station's equipment, therefore it is expected that the users carry charging cables in their
vehicles. EV parking places must be placed within the reach of the charging cable. Minimum
length of the charging cable should be 1,5 m (in the case of the most optimal EV parking).
3.4.2 Possible charging station placements
The placement of charging station into its environment must allow easy access to all electric
vehicles for which the station is intended. The charging station can be installed on the
pavement, parking lot, in a parking garage or elsewhere, taking into account the specific
conditions of each of these placements. In all these placement options, the station can also be
installed together with the safety arches. Each different placement has its own requirements as
described below. Due to the station's service doors opening outwards, the space in front of the
station (approximately 50 cm) needs to be free of any obstacles which could prevent the
opening of service doors. Safety arches or car park barriers can be used to prevent direct
contact of vehicles with the charging station.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etrel Gen 6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etrel Gen 6 in the language / languages: English as an attachment in your email.

The manual is 1.77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info