772679
32
Zoom out
Zoom in
Previous page
1/48
Next page
EN 10
Using the induction hob
Grains of sand or other substances may cause scratches and spots that cannot be
removed. Only put pans with a clean base on the cooking surface and always lift pans
to move them. Do not use the hob as a worktop.
Pans for induction cooking
Pans that have already been used for cooking on a gas hob are no longer suitable for use
on an induction hob.
Only use pans that are suitable for electric and induction cooking with:
a thick base of a minimum of 2.25 mm;
a flat base.
The best pans are those with the ‘Class Induction’ quality mark.
Be careful with thin enamelled sheet steel pans:
the enamel may come loose from the steel at high settings if the pan is too dry;
high power level settings may cause the base of the pan to warp.
Never use pans with a misshapen base. A hollow or rounded base can interfere with
the operation of the overheating protection, causing the appliance to become too hot.
This may lead to the glass top cracking and the pan base melting. Damage caused by using
unsuitable pans or boiling dry is excluded from the guarantee.
Never let an empty pan stand on a cooking zone that is switched on. While the hotplate
is protected and will switch itself off, the pan will be extremely hot. The pan could be
damaged.
Cook with the lid on the pan. This way you save up to 50% energy.
Do not use pans that are smaller than the cooking zone. This avoids the possibility of spilled
food getting onto the glowing hot cooking zone. Burnt-on spilled food is difficult to remove.
Damage caused by using unsuitable pans or boiling dry is excluded from the guarantee.
Not all pans are suitable for induction cooking. It is therefore important to know whether
the pan is made of the correct material. You can use a magnet to check whether your
pan is suitable. The pan is suitable if its base is attracted by the magnet.
Suitable Unsuitable
Special stainless steel pans Earthenware
Class Induction Stainless steel
Solid enamelled pans Porcelain
Enamelled cast-iron pans Copper / Plastic / Aluminium
USE
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etna FIV560 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etna FIV560 in the language / languages: English, Dutch as an attachment in your email.

The manual is 3.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Etna FIV560

Etna FIV560 User Manual - German, French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info