558300
38
Zoom out
Zoom in
Previous page
1/53
Next page
EN 12
OPERATING THE OVEN
Programming the end time
1. Press the setting dial twice.
The ‘stop’ indicator lamp will flash.
2. Turn the setting dial right or left to set the end time.
3. Press the setting dial again.
The end time has been set; the ‘stop’ indicator lamp lights up.
4. Select a temperature with the temperature knob and an oven function
with the function knob.
The red function indicator light and the orange temperature indicator
light will light up; the oven is switched on.
When the set time has elapsed, the alarm will sound and the
indicator lamp will flash. Press the setting dial to switch off the
alarm and indicator lamp.
If you don’t do anything, the alarm will switch off automatically
after 1 minute. The indicator lamp will stay flashing until you
have pressed the setting dial.
5. After the cooking time has elapsed, turn the temperature knob and
the function knob to ‘0’ to also switch off the oven indicator lights.
Programming the start and end time
1. Press the setting dial once.
The ‘start’ indicator lamp will flash.
2. Turn the setting dial right or left to set the start time.
3. Press the setting dial again.
The start time has been set; the ‘start’ indicator lamp lights up and
the ‘stop’ indicator lamp flashes.
4. Turn the setting dial right or left to set the end time.
5. Press the setting dial again.
The end time has been set; the ‘stop’ indicator lamp lights up.
6. Select a temperature with the temperature knob and an oven function
with the function knob.
The red function indicator light and the orange temperature
indicator light will light up; the oven switches on when the start time
has been reached.
When the set time has elapsed, the alarm will sound and the
indicator lamps will flash. Press the setting dial to switch off the
alarm and indicator lamps.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etna EFG691 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etna EFG691 in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Etna EFG691

Etna EFG691 Additional guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info