558300
36
Zoom out
Zoom in
Previous page
1/53
Next page
EN 10
Setting the clock
The correct current time of day needs to be set when connecting the
unit for the first time. The clock indicator lamp (k) flashes.
1. Press the setting dial once.
The clock indicator lamp (k) goes out.
2. Now press the setting dial four times.
The clock indicator lamp (k) flashes again.
3. Turn the setting dial right or left to set the hands to the correct position.
4. Press the setting dial again.
The current time has been set; the indicator lamp will go out.
If you don’t press the setting dial after setting the time, the indicator
lamp will go out automatically after 10 seconds.
Operating the oven
1. Set the oven to ‘manual operation’.
If no indicator lamp is on, the oven is set to manual operation.
If a lamp is on, you first need to cancel the programming. You
can cancel a set programme by pressing the setting dial for a
few seconds until the indicator lamps concerned go out and you
hear a second audible signal.
2. Select a temperature with the temperature knob and an oven function
with the function knob.
The red function indicator light and the orange temperature indicator
light will light up; the oven is switched on.
See the ‘oven functions’ table for more information on the various
oven functions that are available.
3. After the cooking time has elapsed, turn the temperature knob and
the function knob to ‘0’ to switch the oven off.
Please note: If the oven doesn’t work, it is possible that the timer is
programmed. Cancel the programme by pressing the timer switch
setting dial for a few seconds! The indicator lamp goes out and an
audible signal sounds.
OPERATING THE OVEN
0
°C
50
100
70
120
150
180
200
220
250
k
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etna EFG691 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etna EFG691 in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Etna EFG691

Etna EFG691 Additional guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info