Manual Etna A 813 V (page 18 of 35) (English, German, Dutch, French)

76795

Zoom out

Zoom in

1/35

BUILDING-IN

Building-in

1. Make the cut-out in the work surface. Ensure

that there is sufficient space allowed at the

sides and at the back.

Please note:

■ The area to be cut away at the front is

measured from 10 mm from the body of the

cupboard (cupboard front without door).

2. Make a hole in the side of the kitchen cabinet

to enable the gas pipe to be passed through.

3. Stick the masking strip directly onto the work

surface next to the recess.

4. Screw the 4 clamps under the appliance.

5. Place the appliance in the cut-out.

6. Secure the appliance in position.

7. Make the gas connection. Check the gas

connections with a soap/water mixture

(see "Gas Connection").

8. Put the plug in the socket

(see "Electrical Connection").

9. Test to check the appliance is operational.

The building in of the hob in combination with a

built-in oven or control panel is described in the

installation guide for the oven or control panel.

Attention!

■ The underside of this built-in hob becomes

hot. Take care that you do not place any

flammable or plastic objects in any drawer

under the appliance.

fig. 6

560 480

10 mm

500

585

fig. 4

fig. 5

700002321000_HL_A813V .qxp 11-07-2007 14:05 Pagina 14

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Etna A 813 V in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Etna A 813 V Manual

Product: