76795

Etna A 813 V Manual

17
Zoom out
Zoom in
Previous page
1/35
Next page
13
INSTALLATION/ASSEMBLY
Installation
General
The fitting of the appliance should only be
carried out by a registered Corgi gas fitter.
Please note:
The type of gas and the country for which the
appliance has been designed are indicated on
the ratings plate.
This is a category 3 appliance.
Gasconnection RC1/2" (ISO 7/1-RC1/2)
■ The gas connection must comply with
national and local regulations.
We recommend that the hob be connected
by means of a fixed pipe. Connection using
a specially designed safety hose is also
permitted.
Behind an oven use must be made of a pipe
made entirely out of metal.
Please note:
A safety hose may not be bent and must not
come into contact with moving parts of
kitchen units.
In all cases the connection tap for the
appliance must be positioned such that it is
easily accessible.
Before using the appliance for the first time
check the connections using water and
washing-up liquid to ensure that there are no
gas leaks.
Please note:
The bottom of the hob becomes hot.
Electrical connection
230 V - 50 Hz – 0.6 VA
The electrical connection must comply with
national and local regulations. Wall socket
and plug must be accessible at all times. If
you want to make a fixed connection, ensure
that a multi-pole switch with a distance
between contacts of 3 mm is installed in the
supply cable.
Please note:
This appliance must be earthed. If the
connecting cable is damaged, it may only be
replaced by the manufacturer, the
manufacturer's service organisation or
equivalently qualified persons, in order to
avoid dangerous situations.
Assembly of built-in gas hob
Please note:
Do not install a hob next to a high cupboard or
wall made of flammable material. (If there is
no alternative, ensure that there is a minimal
distance of 40 mm between the outer edge of
the hob and the wall in question. Also ensure
that there is a minimum distance of 65 cm
between the hob and any overhead extractor
fan which may be installed).
700002321000_HL_A813V .qxp 11-07-2007 14:05 Pagina 13
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etna A 813 V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etna A 813 V in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info