Manual ESX SXE1200.1D (page 13 of 40) (English, German)

700196

Zoom out

Zoom in

1/40

PROTECTION CIRCUIT

ThePOWER/PROTECTIONLED(Fig.1,1)lightsupgreen,iftheamplierisinoperation.

ThePOWER/PROTECTIONLED(Fig.1,1)lightsupred,whentheamplierisoverheated,orashortcircuit

occurs respective a too low impedance load is connected to the speaker outputs. If this events, the internal

built-inprotectioncircuitshutsdowntheamplierautomatically.Theampliershouldworkagainproperlyafter

you have solved the problems.

MASTER/SLAVE OPERATION / 2 x SXE1200.1D/SXE2000.1D (FIG. 5a-5c)

Ifyouwanttorunamplier1(MASTER)withtwolineoutputchannelsfromtheheadunitandtheadditional

amplier2(SLAVE)viaOUTMASTER(Fig.1,9),connectthefollowingsetup:

(1) Bass level remote controller

(2) To the head unit, line output left

(3) To the head unit, line output right

(4) RCA Connection between MASTER and SLAVE

Ifeachofbothampliersshoulddriveonesubwoofer,connectthefollowingsetup:

(5) Subwoofer 1 (1-8 Ohms)

(6)Subwoofer2(1-8Ohms),connectedwithreversedpolarityontheSLAVEamplier(–to+).

Ifbothampliersshoulddriveonesubwoofertogether,connectthefollowingsetup:

(7) Subwoofer (2-8 Ohms)

(8)ThesubwoofermustbeconnectedattheSlaveamplierwithreversepolarity(–to+)

(9) MASTER and SLAVE must be connected at both minus/negative speaker terminals

IMPORTANT!

Always observe the correct polarity of all connections!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ESX SXE1200.1D in the language / languages: English, German as an attachment in your email.

The manual is 3,89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ESX SXE1200.1D Manual

Product: