700183
20
Zoom out
Zoom in
Previous page
1/24
Next page
20
ENGLISH
INTERCONNECTION EXAMPLE
3-channel-mode: 1 x Stereo-System and 1 x Mono Subwoofer
FUNCTIONAL INSTRUCTIONS
INTERCONNECTION
Connect the RCA line outputs of the head unit with the RCA jacks INPUT of the amplier with appropriate high-value RCA cables.
If a separate SUB OUT from your head unit is available, use this for the INPUT CH3/4 on the amplier.
Connect the speakers with SPEAKER OUTPUT + CH 1 - and + CH 2 -, and the subwoofer with the SPEAKER OUTPUT CH3/4
+ BRIDGED - of the amplier.
Always ensure that the total impedance load per channelpair (CH1 & CH2) is not lower than 2 ohms and the total impedance load
of the subwoofer (CH3 & CH4) is not lower than 4 ohms. Too low impedance cause high temperature and will shut down the
amplier operation.
INPUT MODE-Schalter
Refer to the notes on page 18.
CROSSOVER SETTINGS CH1/2 (STEREO SYSTEM)
Refer to the notes on page 18.
LEVEL INPUT CONTROLLER CH1/2 (STEREO SYSTEM)
Refer to the notes on page 18.
BASS BOOST CONTROLLER CH1/2 (STEREO SYSTEM)
The BASS BOOST controller must be turned to 0 dB position in this interconnecting example .
CROSSOVER SETTINGS CH3/4 (SUBWOOFER)
Refer to the notes on page 19.
LEVEL CONTROLLER CH3/4 (SUBWOOFER)
Refer to the notes on page 19.
BASS BOOST CONTROLLER CH3/4 (SUBWOOFER)
The BASS BOOST controller adjusts the bass enhancement between 0db and +12dB.
BASS REMOTE CH3/4 (SUBWOOFER)
The enclosed BASS REMOTE CONTROLLER adjusts the bass-level e.g. from the driver’s seat of the subwoofer on CH 3/4.
Please use only this enclosed bass remote controller and cable.
Connect stereo RCA outputs (FL/FR & RL/RR or
SUB OUT) of the head unit with INPUT CH1 / CH2
and CH3 / CH4 of the amplier
HP or FULL 4CH
LP/BP
Subwoofer
4 – 8 Ohms
Connect Bass Level
Controller with the
enclosed cable
Loudspeaker
left, front
2 – 8 Ohms
Loudspeaker
right, front
2 – 8 Ohms
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ESX QE1200.4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ESX QE1200.4 in the language / languages: English, German as an attachment in your email.

The manual is 3,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info