469831

Esscom BUTLER E465 Manual

19
Zoom out
Zoom in
Previous page
1/104
Next page
English
19
Answering machine
9 Answering machine
The Butler E465 has a built-in digital answering machine with a recording capacity of 10 min. This
answering machine can be controlled by the base and by the handset. The answering machine can
be operated remotely and features the possibility of recording two outgoing messages (Message 1
and Message 2).
An internal voice will state various information, such as day and time of the call, as well as settings
such as VIP code, ring delay... The language available of the internal voice is indicated on the packing!
9.1 Answering machine settings
Some settings can also be done on the base but most settings are controlled by the handset.
Setting the base speaker volume
To change the volume during playback of incoming or outgoing messages:
The volume can be set from 0 to 9. If the volume is set to the lowest position there will be no
audible output during call screening and during remote interrogation, but there will be a level 1
output for other operation.
Turning answering machine on/off
If the answering machine is on, the answering on/off LED (17) on the base will light up
continuously (or blink when there are new messages) and the machine will automatically pick up
the line after a number of rings (see “ Setting number of rings (Answer delay)”). On the handset
the -icon will be show (or blink when there are new messages).
If the answering machine is off, the answering on/off LED (17) on the base will not lit and the
-icon will not been shown on the handset display.
To turn the answering on/off from the base.
To turn the answering on/off from the handset:
1 Enter the menu.
2 Select “REGISTER” and confirm.
3 Select “SELECT BASE” and confirm.
4 Select a base or select “AUTO” and confirm.
When you have activated Automatic base selection and the handset is out of range
on the current base, the handset will only search for the strongest base in standby
(not during communication).
All messages and settings are stored on flash-memory and will not be erased when
the adapter is unplugged. Only the day/time settings will be erased.
Press the base volume keys to increase or to decrease.
1 Press the on/off key on the base to switch on the answering machine.
2 A voice confirms the setting and playback the active outgoing message.
3 Press the on/off key again to switch off the answering machine.
1 Enter the menu.
2 Select “TAM SETTINGS” and confirm.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Esscom BUTLER E465 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Esscom BUTLER E465 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info