Manual Espressions EP6500 Vacu Pro 30 (page 31 of 48) (English, German, Dutch, French)

783520

Zoom out

Zoom in

1/48

Packing in Containers

ATTENTION:

Exclusively and only use Espressions Magic

Vac® containers, because they are resistant

to the vacuum value obtained by Vaco Pro 30,

while containers by other manufacturers could

implode and cause injury.

a) Connect the Container to the machine,

inserting the tube (21) in the Vacuum

Connection (11) (fig. A) and on the Container

lid, turning its knob according to the

instructions supplied with the Container

itself.

b) Press ‘C’ (8) (fig. A); the machine will carry

out the vacuum cycle automatically and will

switch off when the operation is complete.

The pump switches off automatically after

approximately 5 minutes. At the end of

the cycle, extract the tube (21) from the

Container and then from the Vacuum

Connection (11) of the machine.

Quick marinating

With the exclusive ‘Quick marinating’, function,

the machine keeps the vacuum in the container

for several minutes, then automatically releases

it, allowing the food to ‘rest’ for 30 seconds.

This pulsating vacuum and rest action is repeated

again and again and allows for much quicker

marinating. Only use the specific square

Espressions Magic Vac® Executive 2.5 litre

original container.

a) To marinate meats, poultry or fish, perforate

the surface of the food and place it in the

container, covered with the marinade of

your choice, leaving at least 3 cm from the

top container border, and placing the lid

on the container. Hook up the container

lid safety latches then rotate the knob to

‘OPEN - (M)’.

NOTE: Make sure that the lid gasket and the

container border are dry and clean.

b) Using the tube (21) connect the container lid

knob to the Vacuum connection (11) of the

machine (fig. A).

c) Press ‘M’ (9) , indicated by the lit blue LED

indicator (9.a) above, which will remain

steadily lit during the vacuum phase and

flashing in the standby phase. The machine

switches off automatically after the third

vacuum phase, emitting an acoustic signal

(beep). The entire complete cycle lasts about

12 minutes.

NOTE: At the end of the cycle, if you wish to

keep your marinade vacuumed, rotate the

container knob to ‘CLOSED’ position.

d) Disconnect the Pipe (21) first from the

container, then from the machine air inlet.

Lastly press ‘STOP/CANCEL’ (9) to end the

cycle. The machine can be stopped at any

time by pressing ‘STOP/CANCEL’ (9); to

repeat the marinating operation, disconnect

the pipe from the container and wait for

the container to completely fill with air.

Reconnect the tube (21) to the container knob

(in OPEN - M position), then restart the quick

marinating cycle by pressing ‘M’ (9).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Espressions EP6500 Vacu Pro 30 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2.5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Espressions EP6500 Vacu Pro 30 Manual

Product: