Receiving Fax and Data Calls
The procedure for receiving fax and data calls depends
on your network and subscription. If you have different
numbers for speech, fax and data calls, this is referred
to as multi numbering. This means that you can have
up to three numbers in your subscription. If you only
have one number for all call types, this is referred to as
single numbering.
Receiving Fax and Data Calls – Multi
Numbering
If your network and subscription support multi
numbering, the I 888 WORLD will display the type of in-
coming call. There are two possible types apart from
speech calls:
• Fax calls
• Data calls
The display shows the type of call on the middle row.
To receive a fax or data call:
Connect your computer to the phone.
Answer the call from within the software appli-
cation (if it does not answer automatically).
Receiving Fax and Data Calls – Single
Numbering
If your network and subscription only support single
numbering, the phone does not recognize the type of
incoming call. This means that the calling part has to
tell you if you are going to receive a fax or data call.
Do the following to prepare your phone for a certain
type of call:
In the menu system, scroll to ‘Next call type’
(the ‘Data menus’ must be turned on) and press
YES.
Select the type of call you are going to receive.
• If you select ‘Speech’, the next call will be
handled as a speech call.
• If you select ‘FAX’, the next call will be
handled as a fax call.
• If you select ‘Data’, the next call will be
handled as a data call.
Receive the call according to the instructions
above.
Note! The next call setting remains until you change it. The
current setting, if not a speech call, is shown on the
middle row of the standby display (see picture in the
margin).
Press to enter the menu system. See inside the cover. 31
