Manual Ergofix 79525 (page 22 of 36) (English, German, Dutch, French)

621626

Zoom out

Zoom in

1/36

6. In use, pay attention to avoid the machine oil splashing into the inside of the

motor or onto the triangle belt pulley, or the electric motor and triangle belt will

be damaged. The triangle belt would be lengthened after being used for a

certain period of time, it’s tightness can be adjusted with the motor slide and

the middle belt pulley.

7. Do not place any tools, parts and other sundries on the surface of the

guideway, so as to avoid the damage to the accuracy of the guideways.

8. If you want to change the direction of the motor rotation, you must key stop

firstly.

9. Before leaving the factory, the spindle has been lubricated with high-grade

grease, it can guarantee normal operation for 2000 hours. After these 2000

hours proceed as follows:

- remove the chuck at the front end of spindle

- loosen the flange screw in front of the spindle

- take off the stop ring, belt wheel, gear and two circular nuts at the near end

of spindle

- hammer the tail end of the spindle with wooden hammer and aluminium rod

- the spindle can be taken out forward

- after cleaning, refill lubricating oil

Install the spindle according to the reversed procedure. Pay attention to

adjusting the gap of spindle bearing to fitness with two circular nuts.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ergofix 79525 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ergofix 79525 Manual

Product: