621626

Ergofix 79525 Manual

19
Zoom out
Zoom in
Previous page
1/36
Next page
17
3.0 TRANSMISSION SYSTEM
1. Main moving system
The four-grade speeds spining at the main
spindle of machine tool is realized by three
triangle belt cone pulleys, driven by triangle
belts, the speed changes is shown as Fig. 2.
Motor shaft
A: 1; 250 rpm.
A: 2; 500 rpm.
Bridge shaft
B: 1; 1000 rpm.
B: 2; 2000 rpm.
Fig. 2 Main spindle
2. Feed moving system
The longitudinal feed motion of the machine tool is done by a gear at the spindle
end, through a gear change transmitted to the leading screw and towing the slider,
the threads of which is as table 1 on page 29.
4.0 INSTALLATION AND TEST RUN
1. After opening package box, check whether the accessories of machine tool is
complete, whether machine tool and electric apparatus circuits have any
damage, according to packing list.
2. Install the machine tool securely on a solid platform with two M8 screw bolts.
3. When the lathe is transitted, all movable parts must be fixed, so as to avoid
machine tilt and damage by parts slid and impact.
4. Clear the anti-rust grease surfaces with gasoline and kerosene, pour some
mechanical oil on surfaces of slideway, tailstock sleeve, leading screw and
other places for lubrication.
5. Turn the handwheels by hand, check whether the moving parts are blocked or
loosened and make appropriate adjustments.
6. Insert the motor plug into a three-line socket (the grounding protection must be
secure and reliable).
7. Shift the machine speed in to minimum, start the motor. After running the main
spindle for 20 minutes, check whether different parts have abnormal condition,
increase the speed progressively to continue the test run.
8. Prior to test run and formal use of the machine, you must first read this
instruction manual carefully. Understand thoroughly the basic construction of
machine tool, the operating procedure, the lubricating condition, securities and
maintenance etc., then you can operate the lathe.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ergofix 79525 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ergofix 79525 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info