779795
22
Zoom out
Zoom in
Previous page
1/37
Next page
22
EN
4. Lock the fence locking lever (37) (step 4).
Uninstall:
1. Unlock the fence locking lever (37).
2. Slide the fence (13) to the end of the slot and remove it from the slot.
05 Replacing saw blade (Fig. D, E, F)
WARNING! Always use saw blades according to the intended use!
using new saw blades!
Use only saw blades for which the maximum possible speed is not less
than the maximum spindle speed of the product.
Attachments are sharp and hot after use! Handle them with care! Wear
safety gloves when handling attachments to avoid injuries like burns and
cuts!
The rotation direction arrow on the saw blade (34) should comply with the
Follow these steps for replacing a worn or damaged saw blade:
1. Open the lower retractable blade guard (32) by hand to expose the locking screw
(33a) of the guard mounting plate (33) (Fig. D step 1).
2. Loosen the locking screw (33a) with the provided multi tool (7) (Fig. D step 2)
until the guard mounting plate (33) can be slid to the side (Fig. D step 3). For
EMIS216S, press down the operating handle (1) to help sliding.
3. Press the spindle locking button (26) fully and hold it in position. (Fig. E)
4. Turn the clamping screw (34a) slightly with the provided multi tool until the spindle
is locked.
5. Loosen the clamping screw (34a) clockwise and remove it together with the washer
the spindle (34d) (Fig. F).
6. Place a new saw blade on the spindle and make sure that the bore of the saw
guard (30).
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Erbauer EMIS216S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Erbauer EMIS216S in the language / languages: English as an attachment in your email.

The manual is 5.45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info