❏ Contacts
Select a recipient from the contacts list. You can also add or edit a contact.
❏ Recent
Select a recipient from the sent fax history. You can also add the recipient to the contacts list.
Fax Settings
Select the menus on the control panel as described below.
Fax > Fax Settings
Scan Settings:
❏ Original Size (Glass)
Select the size and orientation of the original you placed on the scanner glass.
❏ Color Mode
Select whether to scan in color or in monochrome.
❏ Resolution
Select the resolution of the outgoing fax.
❏ Density
Sets the density of the outgoing fax.
❏ Remove Background
Detects the paper color (background color) of the original document, and removes or lightens the
color. Depending on the darkness and vividness of the color, it may not be removed or lightened
❏ ADF Continuous Scan
When sending a fax from the ADF, you cannot add originals in the ADF
aer
starting scanning. If
you place dierent sized originals in the ADF, all of the originals are sent at the largest size among
them. Enable this option so that the printer asks if you want to scan another page
aer
an original in
the ADF has
nished
scanning.
en
you can sort and scan your originals by size and send them as
a single fax.
Fax Send Settings:
❏ Direct Send
Sends monochrome faxes to a single recipient as soon as the connection is made, without saving the
scanned image to memory. If you do not enable this option, the printer starts the transmission aer
saving the scanned image to memory and may cause a memory full error when sending many pages.
By using this option, you can avoid the error, but it takes longer to send the fax. You cannot use this
option when using the ADF 2-Sided option and when sending a fax to multiple recipients.
❏ Send Fax Later
Sends a fax at a time you specied. Only a monochrome fax is available when using this option.
User's Guide
Faxing
127
