617864
91
Zoom out
Zoom in
Previous page
1/102
Next page
Item Explanation
020 Special Adjusts the print quality for special paper according to the paper type.
Settings (default in bold):
0: Plain paper
1: Coated paper 1
2: Coated paper 2
051 Feed Offset Do this adjustment after you have eliminated the variation between the paper sources by
055 Feed Reg1 MP/059 Feed Reg1 C1/063 Feed Reg1 C2.
This function adjusts the vertical position at which to start printing. The position moves
lower on the sheet of paper as the value increases. This setting is used when doing
single-sided printing or printing on the back side of the sheet of paper for duplex printing.
Settings (default in bold):
-3.5 ... 0.0 ... 3.5 mm in 0.5 mm increments
052 Scan Offset Do this adjustment after you have eliminated the variation between the paper sources by
056 Scan Reg1 MP/060 Scan Reg1 C1/064 Scan Reg1 C2.
This function adjusts the horizontal position at which to start printing. The position moves
to the right of the sheet of paper as the value increases. This setting is used when doing
single-sided printing or printing on the back side of the sheet of paper for duplex printing.
Settings (default in bold):
-3.5 ... 0.0 ... 3.5 mm in 0.5 mm increments
053 Feed Offset2 Do this adjustment after you have eliminated the variation between the paper sources by
057 Feed Reg2 MP/061 Feed Reg2 C1/065 Feed Reg2 C2.
This function adjusts the vertical position at which to start printing. The position moves
lower on the sheet of paper as the value increases. This setting is used when printing on
the front side of the sheet of paper for duplex printing.
Settings (default in bold):
-3.5 ... 0.0 ... 3.5 mm in 0.5 mm increments
054 Scan Offset2 Do this adjustment after you have eliminated the variation between the paper sources by
058 Scan Reg2 MP/062 Scan Reg2 C1/066 Scan Reg2 C2.
This function adjusts the horizontal position at which to start printing. The position moves
to the right of the sheet of paper as the value increases. This setting is used when printing
on the front side of the sheet of paper for duplex printing.
Settings (default in bold):
-3.5 ... 0.0 ... 3.5 mm in 0.5 mm increments
055 Feed Reg1 MP
059 Feed Reg1 C1
063 Feed Reg1 C2
Adjusts the vertical position at which to start printing and eliminate the variation between
the paper sources. The position moves lower on the sheet of paper as the value increases.
This setting is used when feeding paper from the MP tray, C1, or C2 for single-sided
printing or printing on the back side of the sheet of paper for duplex printing.
Settings (default in bold):
-3.5 ... 0.0 ... 3.5 mm in 0.5 mm increments
056 Scan Reg1 MP
060 Scan Reg1 C1
064 Scan Reg1 C2
Adjusts the horizontal position at which to start printing and eliminate the variation
between the paper sources. The position moves to the right of the sheet of paper as the
value increases. This setting is used when feeding paper from the MP tray, C1, or C2 for
single-sided printing or printing the back side of the sheet of paper for duplex printing.
Settings (default in bold):
-3.5 ... 0.0 ... 3.5 mm in 0.5 mm increments
AL-C300 Series User's Guide
Appendix
91
91


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson WORKFORCE AL-C300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson WORKFORCE AL-C300 in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson WORKFORCE AL-C300

Epson WORKFORCE AL-C300 User Manual - German - 108 pages

Epson WORKFORCE AL-C300 User Manual - Dutch - 107 pages

Epson WORKFORCE AL-C300 Installation Guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info