617864
92
Zoom out
Zoom in
Previous page
1/102
Next page
Item Explanation
057 Feed Reg2 MP
061 Feed Reg2 C1
065 Feed Reg2 C2
Adjusts the vertical position at which to start printing and eliminate the variation between
the paper sources. The position moves lower on the sheet of paper as the value increases.
This setting is used when feeding paper from the MP tray, C1, or C2 for printing on the front
side of the sheet of paper for duplex printing.
Settings (default in bold):
-3.5 ... 0.0 ... 3.5 mm in 0.5 mm increments
058 Scan Reg2 MP
062 Scan Reg2 C1
066 Scan Reg2 C2
Adjusts the horizontal position at which to start printing and eliminate the variation
between the paper sources. The position moves to the right of the sheet of paper as the
value increases. This setting is used when feeding paper from the MP tray, C1, or C2 for
printing on the front side of the sheet of paper for duplex printing.
Settings (default in bold):
-3.5 ... 0.0 ... 3.5 mm in 0.5 mm increments
101 2nd TR Plain
102 2nd TR Labels
103 2nd TR Thick
104 2nd TRExtraThk
105 2nd TR Envelop
107 2nd TR Coated1
108 2nd TR Coated2
109 2nd TR 1200
Adjusts the density and image granularity for 600dpi printing (for plain paper, labels, thick
paper, extra-thick paper, envelopes, coated 1 and coated 2), and 1200 dpi printing (for all
paper types). The image becomes darker as the value increases. This setting is used when
doing single-sided printing or printing on the back side of the sheet of paper for duplex
printing.
Settings (default in bold):
-8 ... 0 ... 7 (step 1)
111 2ndTR Plain 2
113 2ndTR Thick 2
114 2ndTRExtraThk2
117 2ndTRCoated1 2
118 2ndTR Coated2 2
119 2ndTR 1200 2
Adjusts the density and image granularity for 600dpi printing (for plain paper, thick paper,
extra-thick paper, coated 1 and coated 2), and 1200 dpi printing (for all paper types). The
image becomes darker as the value increases. This setting is used when printing on the
front side of a sheet of paper.
Settings (default in bold):
-8 ... 0 ... 7 (step 1)
151 Temp Plain
153 Temp Thick
155 Temp Envelope
Adjusts the temperature at which toner fixes to plain paper, thick paper and envelopes.
The setting becomes cooler as the values decreases. Note that printouts may curl more as
the value increases.
Settings (default in bold):
-10, -5, 0
160 Fuser Control Select 1 if the fluorescent light flickers when printing.
Settings (default in bold):
0: On (for 220-240 V model), Off (for 110-120 V model)
1: On
2: Off
201 Highland Adjust this setting if black dots appear on the printed page when using the printer in
locations at high altitudes. See the table below and select a suitable value according to the
location in which the printer is being used. Increasing the value makes the printer more
suited for higher altitudes. For the altitudes at which this printer can be operated, see
“Environmental” on page 89.
Settings (default in bold):
0 ... 6
AL-C300 Series User's Guide
Appendix
92
92


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson WORKFORCE AL-C300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson WORKFORCE AL-C300 in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson WORKFORCE AL-C300

Epson WORKFORCE AL-C300 User Manual - German - 108 pages

Epson WORKFORCE AL-C300 User Manual - Dutch - 107 pages

Epson WORKFORCE AL-C300 Installation Guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info