617864
6
Zoom out
Zoom in
Previous page
1/102
Next page
Important Instructions
Important Safety
Instructions
Setting up the printer
Because the printer weighs approximately 27.5 kg
(60.6 lb) for the N model or 28.3 kg (62.4 lb) for the
DN model with consumable products installed, one
person should not lift or carry it. Two people should
carry the printer, lifting it by the correct positions as
shown below.
When moving the printer, always keep it
horizontal.
If you are unable to insert the AC plug into the
electrical outlet, contact an electrician.
Do not connect to an uninterruptible power source.
If you connect to one, it may cause malfunctions or
damage.
Be sure the AC power cord meets the relevant local
safety standards. Use only the power cord that
comes with this product. Use of another cord may
result in fire or electric shock. This product’s power
cord is for use with this product only. Use with
other equipment may result in fire or electric shock.
If damage occurs to the plug, replace the cord set or
consult a qualified electrician. If there are fuses in
the plug, make sure you replace them with fuses of
the correct size and rating.
Use a grounded outlet that matches the printer’s
power plug. Do not use an adapter plug.
Avoid using an electrical outlet that is controlled by
wall switches or automatic timers. Accidental
disruption of power can erase valuable information
in your computer’s and printer’s memory.
Make sure that there is no dust on the socket.
Be sure to insert the plug completely into the
electrical outlet.
Do not handle the plug with wet hands.
Unplug this printer from the wall outlet and refer
servicing to a qualified service representative under
the following conditions:
A. When the power cord or plug is damaged or
frayed.
B. If liquid has been spilled into it.
C. If it has been exposed to rain or water.
D. If it does not operate normally when the
operating instructions are followed. Adjust
only those controls that are covered by the
operating instructions since improper
adjustment of other controls may result in
damage and will often require extensive
work by a qualified technician to restore the
product to normal operation.
E. If it has been dropped or the cabinet has
been damaged.
F. If it exhibits a distinct change in
performance, indicating a need for service.
Avoid sharing outlets with other appliances.
Connect all equipment to properly grounded
power outlets. Avoid using outlets on the same
circuit as photocopiers or air control systems that
regularly switch on and off.
Connect your printer to an electrical outlet that
meets the power requirements of this printer. Your
printer’s power requirements are indicated on a
label attached to the printer. If you are not sure of
the power supply specifications in your area,
contact your local power company or consult your
dealer.
If you use an extension cord, make sure that the
total of the ampere ratings on the products plugged
into the extension cord does not exceed the
extension cord ampere rating.
AL-C300 Series User's Guide
Important Instructions
6
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson WORKFORCE AL-C300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson WORKFORCE AL-C300 in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson WORKFORCE AL-C300

Epson WORKFORCE AL-C300 User Manual - German - 108 pages

Epson WORKFORCE AL-C300 User Manual - Dutch - 107 pages

Epson WORKFORCE AL-C300 Installation Guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info