617864
8
Zoom out
Zoom in
Previous page
1/102
Next page
Never push objects of any kind through cabinet
slots as they may touch dangerous voltage points or
short out parts that could result in a risk of fire or
electric shock.
Do not sit or lean on the printer. Do not put heavy
objects on the printer.
Do not use any kind of combustible gases in or
around the printer.
Never force the printer’s components into place.
Although the printer is designed to be sturdy, rough
handling can damage it.
Do not leave jammed paper inside the printer. This
can cause the printer to overheat.
Never spill liquid of any kind on the printer.
Adjust only those controls that are covered by the
operating instructions. Improper adjustment of
other controls may result in damage and may
require repair by a qualified service representative.
Do not turn off the printer:
-After turning on the printer, wait until Ready
appears on the LCD panel.
-While the Ready light is flashing.
-While the Data light is on or flashing.
-While printing.
Avoid touching the components inside the printer
unless instructed to do so in this guide.
Follow all warnings and instructions marked on the
printer.
Except as specifically explained in the printer’s
documentation, do not attempt to service this
product yourself.
Periodically disconnect the plug from the electrical
outlet and clean the blades.
Do not disconnect the plug while the printer is on.
If the printer will not be used for a long time,
disconnect the plug from the electrical outlet.
Unplug this printer from the wall outlet before
cleaning.
Use a well-wrung cloth for cleaning and do not use
liquid or aerosol cleaners.
Handling the consumable
products and maintenance parts
Do not burn used consumable products or
maintenance parts because they might explode and
injure someone. Dispose of them according to local
regulations.
Be sure to keep consumable products and
maintenance parts out of the reach of children.
When handling a toner cartridge, always place it on
a clean, smooth surface.
Do not attempt to modify or take it apart
consumable products or maintenance parts.
Do not touch the toner. Always keep toner away
from your eyes. If toner gets on your skin or clothes,
wash it off with soap and water immediately.
If toner is spilled, use a broom and dustpan or a
damp cloth with soap and water to clean it up.
Because the fine particles can cause a fire or
explosion if they come into contact with a spark, do
not use a vacuum cleaner.
Wait at least one hour before using a toner cartridge
after moving it from a cool to a warm environment
to prevent damage from condensation.
To get the best print quality, do not store the toner
cartridge or photoconductor unit in an area subject
to direct sunlight, dust, salty air, or corrosive gases
(such as ammonia). Avoid locations subject to
extreme or rapid changes in temperature or
humidity.
When removing the photoconductor unit, do not
expose it to sunlight at all and avoid exposing it to
room light for more than three minutes. The
photoconductor unit contains a light-sensitive
drum. Exposure to light can damage the drum,
causing dark or light areas to appear on the printed
page and reducing the service life of the drum. If you
need to keep the photoconductor unit out of the
printer for long periods, cover it with an opaque
cloth.
AL-C300 Series User's Guide
Important Instructions
8
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson WORKFORCE AL-C300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson WORKFORCE AL-C300 in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson WORKFORCE AL-C300

Epson WORKFORCE AL-C300 User Manual - German - 108 pages

Epson WORKFORCE AL-C300 User Manual - Dutch - 107 pages

Epson WORKFORCE AL-C300 Installation Guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info