617695
194
Zoom out
Zoom in
Previous page
1/241
Next page
Messages What to do
Paper Type Error
Cannot switch to specified roll
paper because paper type is
different.
Continue to print with paper
currently loaded?
The Media Type setting of the printer driver and the paper type of the roll paper loaded on
the printer are different.
If the Z button is pressed, the printer prints to the roll paper currently in use.
If the ( button is pressed, paper can be switched.
If you want to switch a roll paper even though it is a different type, open the Setup menu,
and then under Roll Switch Condition, change Paper Type to Disable.
U “Setup menu” on page 154
Paper Width Error
Cannot switch to specified roll
paper because paper width is
different.
Continue to print with paper
currently loaded?
The Source setting of the printer driver and the width of the roll paper loaded on the
printer are different.
If the Z button is pressed, the printer prints to the roll paper currently in use.
If the ( button is pressed, paper can be switched.
If you want to switch a roll paper even though it is a different paper width, open the Setup
menu, and then under Roll Switch Condition, change Paper Width to a setting other
than Width Match.
U “Setup menu” on page 154
Paper Length Error
Insufficient remaining amount in
specified roll paper.
Continue to print with paper
currently loaded?
The remaining amount of roll paper loaded in Roll 1 and Roll 2 is shorter than the print
length, so the roll paper cannot be switched.
If the Z button is pressed, the printer prints to the roll paper currently in use.
If the ( button is pressed, paper can be switched.
If you want to print even though remaining amount of roll paper is shorter than the print
length, open the Setup menu, and then under Roll Switch Condition, change Paper
Length to a setting other than Print Length.
U “Setup menu” on page 154
Roll Switch Error
Cannot switch roll paper
automatically.
Check printer settings.
Continue to print with paper
currently loaded?
If one of the following settings in the Setup menu is set as follows, roll paper is not
switched automatically.
Auto Cut is Off.
Auto Loading is Off.
If the Z button is pressed, the printer prints to the roll paper currently in use.
If the ( button is pressed, paper can be switched.
To enable automatic switching of roll paper, change both settings above to On.
U “Setup menu” on page 154
Firmware Error
Firmware mismatch between PS3
Expansion Unit and printer.
Refer to manual for details.
Operation is not possible because the versions of firmware of the optional Adobe
PostScript 3 Expansion Unit and the firmware of the printer are not compatible.
Update both to the latest firmware.
The latest firmware can be downloaded from the Epson website.
Information
Cannot start copy because
non-supported media is loaded.
Refer to manual for details.
Load paper that supports large copy/large scan, and then print the copy/scan file again.
For paper that supports large copy/large scan, see the following.
U “Epson Special Media Table” on page 210
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
Problem Solver
194
194


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson SureColor SC-T5200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson SureColor SC-T5200 in the language / languages: English as an attachment in your email.

The manual is 9,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson SureColor SC-T5200

Epson SureColor SC-T5200 Installation Guide - English, German - 48 pages

Epson SureColor SC-T5200 User Manual - German - 263 pages

Epson SureColor SC-T5200 Installation Guide - Dutch - 48 pages

Epson SureColor SC-T5200 User Manual - Dutch - 257 pages

Epson SureColor SC-T5200 Installation Guide - French, Italian, Portuguese, Spanish - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info