617695
192
Zoom out
Zoom in
Previous page
1/241
Next page
Messages What to do
Take-Up Error
Is anything obstructing the
take-up reel sensor system?
After checking the take-up reel unit sensor and removing any obstructions, press the Z
button.
If there is loose paper around the take-up reel unit roll core, set the Auto switch to Off and
keep the Manual pressed in the take-up direction to remove the slack. After confirming
that the paper is correctly attached, return the Auto switch to its original position and
press the Z button.
U “Using the Auto Take-up Reel Unit (SC-T7200 Series Only)” on page 53
HDD Error
HDD used for another printer
needs to be formatted. Continue?
Optional hard disk units and Adobe PostScript 3 Expansion Units that have been
connected to other devices must be formatted after being connected to this printer. The
disk can not be used until it is formatted.
Storage Error
Check if hard disk unit is correctly
installed.
Press the W button and select Job Cancel to stop printing. Remove and then reconnect
the optional hard disk unit or Adobe PostScript 3 Expansion Unit.
If this message appears on the LCD panel again, contact your dealer or Epson Support.
When you are printing via the printer driver included with a printer, you can print
regardless of the hard disk status if you select the Advanced tab in the printer driver, open
the Settings dialog box of Hard Disk Unit, and select Print only. When the Adobe
PostScript 3 Expansion Unit is connected, you cannot print via the PS driver.
Paper Cut Error
Remove uncut paper.
After pressing the Z button, pull out the paper and cut along the line of the failed cut
using scissors or a third-party cutter.
Pull the edge of the paper straight outside the printer.
Data Size Error
Data size of print job is too large.
Check on print job.
The optional hard disk unit or Adobe PostScript 3 Expansion Unit can store print jobs up to
100 GB in size. To print larger jobs, select the Advanced tab in the printer driver, open the
Settings dialog box of Hard Disk Unit, and select Print only; alternatively, ensure that
print jobs are less than 100 GB in size.
HDD Store Error
Hard disk does not have enough
space.
See documentation for how to
delete stored print jobs.
Unwanted jobs can be deleted in Remote Manager or the LFP HDD Utility.
U “Saving to and Reprinting on the Optional Hard Disk Unit” on page 69
HDD Boot Error
Hard disk error. Hard disk cannot
be used.
Press the Z button to clear the error from the control panel. When you are printing via
the printer driver included with the printer, you can print regardless of the hard disk unit
status when you select Print only in the Settings dialog box of Hard Disk Unit. When the
Adobe PostScript 3 Expansion Unit is connected, you cannot print via the PS driver.
If this message appears on the LCD panel again, contact your dealer or Epson Support.
Checking hard disk Data saved to the optional hard disk unit or Adobe PostScript 3 Expansion Unit
(hereinafter referred to as the hard disk) is being checked. If the results of the check
indicate that data restoration is necessary, the restoration is carried out next. Restoration
may take up to 20 minutes.
If the restoration ends, the start completes.
If it was not possible to restore the data, the format menu of the hard disk appears. If the
hard disk is formatted, the hard disk can be used again. If you exit the menu without
formatting the hard disk, only printing that does not use the hard disk is possible.
Copy Error
Can not start copy with this printer
setting.
Refer to manual for details.
The printer will be unable determine the size of the current paper and make enlarged
copies when Off is selected for Paper Size Check in the Setup menu. In the Setup menu,
set Paper Size Check to On, and then reload the paper.
The changed settings are applied after the paper is reloaded. Note that they are not
applied if you just change the menu items.
U “Setup menu” on page 154
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
Problem Solver
192
192


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson SureColor SC-T5200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson SureColor SC-T5200 in the language / languages: English as an attachment in your email.

The manual is 9,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson SureColor SC-T5200

Epson SureColor SC-T5200 Installation Guide - English, German - 48 pages

Epson SureColor SC-T5200 User Manual - German - 263 pages

Epson SureColor SC-T5200 Installation Guide - Dutch - 48 pages

Epson SureColor SC-T5200 User Manual - Dutch - 257 pages

Epson SureColor SC-T5200 Installation Guide - French, Italian, Portuguese, Spanish - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info