617685
158
Zoom out
Zoom in
Previous page
1/198
Next page
Messages What to do
Media Sensor Error
Loaded media or print out has a problem.
Refer to documentation for details.
Press the W button to clear the message from the display.
The auto menu of Auto Media Adjust, Auto Nozzle Check, and Media Adjust of
the media settings are not available in the following media setting or conditions.
Transparent or colored media, or tracing paper is used.
Platen Gap is set to 2.5 in the media settings.
The printer is used in a place that is exposed to direct sunlight or interference
from other ambient light sources.
In these cases, execute the manual menu.
When executing Auto Media Adjust or Media Adjust: U “Media Adjust” on
page 86
When executing Auto Nozzle Check: U “Printing nozzle check patterns” on
page 128
If the printer is exposed to interference from ambient light sources, shade the
printer from these sources and perform the function again; it may succeed. When
the function has failed after shading the printer, execute the manual menu.
If this error is displayed when executing under conditions other than those listed
above, when executing Auto Media Adjust, or the auto menu of Media Adjust,
adjustment pattern printing may fail due to nozzle clogging. Perform head
cleaning, and execute them again.
U “Head Cleaning” on page 129
If this error is displayed under conditions other than those listed above, confirm
that the currently loaded media match usage conditions of the printer.
U “Supported Media” on page 176
Pressure Roller Error
Pressure rollers are positioned incorrectly.
Release media loading lever and
reposition rollers.
One of the following has occurred. Reposition the rollers as described in “Printable
Area”.
None of the rollers is positioned inside the bounds of the black labels.
Only one of the rollers is positioned inside the bounds of the black labels.
The rollers at the edges of the media are not the same type.
(A high pressure roller is at one edge, a low pressure roller at the other.)
On is selected for Media Size Check in the printer settings menu and a roller
is positioned in a black label that is not over the media.
Two rollers are positioned inside the bounds of the same black label.
U “Printable area” on page 91
Ink Layering Error
Pressure rollers are positioned incorrectly.
Reposition rolllers.
You are using the low pressure rollers. Use the high pressure rollers for ink layering.
Roll Type Error
Release and then reset the media loading
lever, then match Roll Type setting to
actual media.
Does the Ro
ll Type specified at media loading match the actual roll type?
Raise the media loading lever to resolve the error. Lower the media loading
lever again, and follow the on-screen instructions of the printer to correctly
specify the Roll Type.
EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Problem Solver
158
158


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson SureColor SC-S50600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson SureColor SC-S50600 in the language / languages: English as an attachment in your email.

The manual is 6,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson SureColor SC-S50600

Epson SureColor SC-S50600 Installation Guide - English, German - 56 pages

Epson SureColor SC-S50600 User Manual - German - 217 pages

Epson SureColor SC-S50600 Installation Guide - Dutch - 56 pages

Epson SureColor SC-S50600 User Manual - Dutch - 182 pages

Epson SureColor SC-S50600 Installation Guide - French, Italian, Portuguese, Spanish - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info