617685
156
Zoom out
Zoom in
Previous page
1/198
Next page
Problem Solver
When a Message is Displayed
If one of the following messages is displayed, read and follow the instructions below.
Messages What to do
Prepare empty waste ink bottle. The waste ink bottle is getting full. Ready a new waste ink bottle.
U “Options and Consumable Products” on page 171
Ink Cartridge Error
Ink cartridge cannot be recognized. Insert
again or replace ink cartridge.
Remove and reinsert the ink cartridge. If the message persists, insert a new
ink cartridge (do not reinsert the ink cartridge that caused the error).
Remove and reinsert the replacement cartridge. If this message appears in
the control panel again, contact your dealer or Epson Support.
U “Replacement procedure” on page 118
Condensation may have formed inside the cartridge. Leave it at room
temperature for at least four hours before installing the cleaning cartridge.
U “Notes on handling ink cartridges” on page 27
When using a different type of Orange ink, see the following to change the
Orange ink.
UUsing Orange Ink (PDF)
Ink Cartridge Error
Ink cartridge cannot be detected. Insert
again or replace ink cartridge.
Ink Cartridge Error
Replace cleaning cartridge.
Remove and reinsert the Cleaning cartridge. If the message persists, insert a
new Cleaning cartridge (do not reinsert the Cleaning cartridge that caused
the error).
U “Replacement procedure” on page 118
Condensation may have formed inside the cartridge. Leave it at room
temperature for at least four hours before installing the cleaning cartridge.
Ink Low The ink is low. Ready a new ink cartridge.
U “Options and Consumable Products” on page 171
Warming Up...
Z Force to start printing
One or more heaters is still being warmed to the specified temperature. To start
printing without waiting for the heater to warm up, press the Z button.
Command Error
Check print settings on RIP.
Press the W button and select Job Cancel. Check that the installed software
RIP is compatible with the printer.
In the SC-S50600 series, if Platen Gap is set to 2.0 to make White ink printing,
this error message may be displayed.
Press the W button, and select Job Cancel to cancel printing.
Then, set Platen Gap to 1.5 or change RIP settings to make prints.
Print Data Error (MS)
Data containing MS cannot be printed if
printer is in 9 color mode.
This error message is displayed when print data using Metallic Silver is sent while
the color mode is set to 9 Color. Change to print data not using Metallic Silver, or
select Change Color Mode to change the color mode to 10 Color.
U “Change Color Mode (SC-S70600 series only)” on page 134
EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Problem Solver
156
156


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson SureColor SC-S50600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson SureColor SC-S50600 in the language / languages: English as an attachment in your email.

The manual is 6,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson SureColor SC-S50600

Epson SureColor SC-S50600 Installation Guide - English, German - 56 pages

Epson SureColor SC-S50600 User Manual - German - 217 pages

Epson SureColor SC-S50600 Installation Guide - Dutch - 56 pages

Epson SureColor SC-S50600 User Manual - Dutch - 182 pages

Epson SureColor SC-S50600 Installation Guide - French, Italian, Portuguese, Spanish - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info