655253
96
Zoom out
Zoom in
Previous page
1/135
Next page
Item Parameter Explanation
Media Tension Lv1 Increase tension if creases appear in the media during printing. The
higher the value, the greater the tension.
Lv2
Lv3
Lv4
Media Suction
0 to 10 (4
*
)
When media is waved on the platen, increase the Media Suction. The
higher the value, the greater the suction.
If graininess or out-of-focus characteristics are detected in printing
results obtained using thin or soft media or if the media is not fed
normally, reduce the Media Suction.
Head Movement
Data Width
*
Choose the range in which the print head moves during printing.
Data Width restricts print head movement to the printed area.
Restricting the extent of print head movement increases print speed.
If Printer Full Width is selected, the print head will move the full width
of the largest media supported by the printer. Select this option for
more even print results with less variation.
Printer Full
Width
Multi Strike Printing
OFF
*
Choose the number of times each line is printed.
To carry out high-density printing using backlight films, increase the
frequency.
2 to 8
Feed Speed Limiter ON
OFF is recommended in normal circumstances.
Set this to ON if media sticks or wrinkles, or tears easily when printing
on thin media.
When this is set to ON, print speed slows down.
OFF
*
Pressure Roller Load Low If the following occurs when printing, you may be able to avoid it by
changing to a load that reduces the pressure on the rollers (for
example: Medium to Light).
When there is wrinkling around the pressure rollers.
When there are stains due to head striking.
When stains on the roller stick to the media.
Medium
High
Remove Skew ON Select whether or not (ON or OFF) to perform skew correction for media
loaded in the printer. The default setting of ON is recommended in
most situations. Set this to OFF if the media shows traces from the
rollers due to skew corrections.
OFF
Periodic CL Cycle
Auto
*
Performs head cleaning at the most suitable time according to the media settings.
If the specified time for periodic cleaning is reached during printing, head cleaning is per-
formed after printing is complete.
Manual
Manual is performed when specifying the frequency according to the usage.
SC-S80600 Series/SC-S60600 Series/SC-S40600 Series User's Guide
Using the Control Panel Menu
96
96


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson SC-S80600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson SC-S80600 in the language / languages: English as an attachment in your email.

The manual is 9,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson SC-S80600

Epson SC-S80600 User Manual - Dutch - 146 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info