655253
95
Zoom out
Zoom in
Previous page
1/135
Next page
Item Parameter Explanation
Advanced Settings In most situations, use the value set for each media type as it is.
When using special media or when a problem such as head striking or
banding is detected in printing results, change the default.
Platen Gap 1.6 Choose the platen gap (the distance between the print head and the
media).
The default setting of 1.6 is recommended in most situations. Choose
2.0 if printout is scratched or smudged. Select 2.5 only if print results are
still smudged when 2.0 is selected. Choosing a larger gap than required
may result in ink stains inside the printer, reduced print quality, or
shorter product life.
2.0
2.5
Heating & Drying
Heater Temperature Pre-heater/
platen heater:
OFF, 30 to
50°C (40
*
)
After heater:
OFF, 30 to
55°C (50
*
)
The temperatures for the pre-, platen, and after heaters can each be
adjusted separately.
Drying Time Per Pass
0 to 10 secs (0
*
)
Select the time the print head pauses to allow drying after each pass.
Choose from values between 0.0 and 10.0 seconds. The time needed for
the ink to dry varies with ink density and the media used. If the ink blurs
on the media, set a longer time for drying the ink.
Increasing the drying time increases the time needed to print.
After Heater Feed Mode 1
To feed media to the after heater after printing, choose Mode 1 or
Mode 2; otherwise, choose OFF.
If Mode 1 is selected, the portion fed for drying will not be rewound
before the next job starts. Select this option if the media will be cut
before the next job starts.
If Mode 2 is selected, the portion fed for drying will be rewound before
the next job starts, eliminating unnecessary margin. Select this option if
multiple jobs will be printed consecutively.
When cutting media using Mode 2, hold down the u button to rewind
the end of the print to the cutter groove, and then cut. If cut without
rewinding the media, printing may not be performed correctly next time.
Mode 2
OFF
*
Additional Dryer
ON
*
This item is displayed only when the Additional Print Drying System
(supplied with the SC-S60600 Series; optional with other models) is
installed.
Select ON to enable, or OFF to disable, the Additional Print Drying
System. Note that even when ON is selected, the Additional Print
Drying System turns off with the heaters when they enter sleep mode.
The Additional Print Drying System turns back on when the heaters
resume operation. Sleep ModeU “The Printer Setup Menu” on
page 98
OFF
SC-S80600 Series/SC-S60600 Series/SC-S40600 Series User's Guide
Using the Control Panel Menu
95
95


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson SC-S80600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson SC-S80600 in the language / languages: English as an attachment in your email.

The manual is 9,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson SC-S80600

Epson SC-S80600 User Manual - Dutch - 146 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info