675424
36
Zoom out
Zoom in
Previous page
1/143
Next page
Creating and Sending
Jobs
You cannot print directly from commercially available
software.
To print jobs created on commercially available
software, send the jobs to the printer using the software
supplied (Garment Creator).
Workflow for Creating and
Sending Jobs
Creating Images for Printing
Create an image using commercially available software
such as Photoshop, Illustrator, and so on.
Creating Jobs
Start Garment Creator and load the image you want to
print, and then make the following settings to create the
job.
Set the position and size of the image according to the
platen size used for printing.
Set the Print Quality and so on
Sending Jobs
Send the job from Garment Creator to the printer.
When receiving a job on the printer, the message Place
shirt and press
to start printing. is displayed, place
the T-shirt on the platen and then print.
For more details on creating and sending jobs, see the
online help for Garment Creator.
Repeat printing
If you send a job from Garment Creator using the USB
memory stick connected to the printer, it is
automatically saved to the USB memory with the
filename Epson_repeat_print.prn. When an
Epson_repeat_print.prn file is saved to a USB memory
stick, the message Place shirt and press
to start
printing. is displayed repeatedly until you press the +
button and select Job Cancel and you can repeat
printing for the same job.
See the following for more details on supported USB
memory sticks and job data.
U “USB memory requirements” on page 58
If you continue to send jobs while the USB memory stick
is connected to the printer, the last job sent overwrites
the previous job and is saved.
Notes on Receiving Jobs
Only the following operations are possible while is
receiving jobs. If buttons do not respond when
operating the control panel, the printer may be
receiving a job; wait for a while and then try again.
Canceling a job
Moving the movable base (platen)
Turning off the power
Note:
After canceling a job, it takes a while before the
printer is ready to print again.
It takes a while to turn off the printer after
performing the power off operation. Also, jobs that
have been received are deleted.
SC-F2100 Series User's Guide
Basic Printing
36
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson SC-F2100 - SURECOLOR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson SC-F2100 - SURECOLOR in the language / languages: English as an attachment in your email.

The manual is 5,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson SC-F2100 - SURECOLOR

Epson SC-F2100 - SURECOLOR User Manual - German - 158 pages

Epson SC-F2100 - SURECOLOR User Manual - Dutch - 149 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info