675424
34
Zoom out
Zoom in
Previous page
1/143
Next page
Amount of pre-treatment liquid to
apply
Apply the diluted pre-treatment liquid to the T-shirt
with a roller or sprayer.
Apply approximately 15 g of pre-treatment liquid to
printing areas of A4 size.
c
Important:
Depending on the dye in the T-shirt, it may be
decolorized by the pre-treatment liquid. Try
applying to a section that is not clearly visible
first.
Do not apply too much pre-treatment liquid.
Applying too much may cause the print quality
to decline.
Applying with a roller
To prevent T-shirt fibers on the roller from sticking to
other T-shirts, use a different roller for each color on the
T-shirt.
U “Options and Consumable Products” on
page 114
A
Fill the tray with diluted pre-treatment liquid and
dip the roller in it.
B
Spread out the T-shirt on a flat surface.
C
Squeeze the pre-treatment liquid out of the roller
by pressing it against the edge of the tray, and
apply the liquid evenly.
We recommend applying to an area larger than
the target print area.
D
Fixate the pre-treatment liquid with the heat
press.
U “Fixating the Pre-treatment Liquid (Heat
Press)” on page 35
Note:
You need to press the fibers flat to produce even
whiteness. Use a heat press to fixate the
pre-treatment liquid since the fibers are not pressed
flat in the oven.
Applying with a sprayer
c
Important:
Depending on the type of sprayer, it may create a
mist when applying the pre-treatment liquid. Wear
a mask, protective eye-wear, and gloves as required,
and make sure the area is well ventilated while
working with the pre-treatment liquid.
For details on using the sprayer, see the manual supplied
with the sprayer.
A
Pour the diluted pre-treatment liquid into the
sprayer.
B
Load the T-shirt into the sprayer, and then spray
the pre-treatment liquid evenly over the printing
surface.
We recommend applying to an area larger than
the target print area.
Note:
You can apply the liquid evenly if you run the roller
over the area after spraying.
C
Fixate the pre-treatment liquid with the heat
press.
U “Fixating the Pre-treatment Liquid (Heat
Press)” on page 35
SC-F2100 Series User's Guide
Basic Printing
34
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson SC-F2100 - SURECOLOR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson SC-F2100 - SURECOLOR in the language / languages: English as an attachment in your email.

The manual is 5,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson SC-F2100 - SURECOLOR

Epson SC-F2100 - SURECOLOR User Manual - German - 158 pages

Epson SC-F2100 - SURECOLOR User Manual - Dutch - 149 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info