771806

Epson SC-F10000 series Manual

34
Zoom out
Zoom in
Previous page
1/224
Next page
Notes when not using the printer
If you are not using it, note the following points when
storing the printer. If it is not stored correctly, you
may not be able to print properly the next time it is used.
❏A service engineer must do pre- and
post-maintenance when the printer is not used for
over 6 weeks. Depending on your region, pre- and
post-maintenance may require a fee.
During pre-maintenance, the ink in the ink tubes
is removed, and the inside of the tubes is washed
using the cleaning fluid in the cleaning cartridge,
to prepare for long-term storage. When restarting
use of the printer, recharge the printer with ink.
Moreover, depending on the environment and
length of time stored, repairs may be required
during post-maintenance even if
pre-maintenance is done. If repairs are necessary,
they may require a fee depending on your region.
Contact your dealer or Epson Support.
❏If you have not used the printer for a long time,
check the print heads for clogging before you start
printing. Clean the heads if the print heads are
clogged.
U “Checking for clogged nozzles” on page 138
❏The pressure rollers may crease media left in the
printer. The media may also become wavy or
curled, causing jams or resulting in the media
coming into contact with the print head. Remove
the media before putting the printer in storage.
❏Store the printer after confirming that the print
head has been capped (the print head is
positioned at the far left). If the print head is left
uncapped for a long time, the print quality may
decline.
Note:
If the print head is not capped, turn the printer on, and
then turn it off.
❏Close all covers before placing the printer in
storage. If you are not using the printer for a long
time, put an anti-static cloth or cover on the
printer to prevent dust. The print head nozzles
are very small, and they can become clogged
easily if fine dust gets on the print head, and you
may not be able to print properly.
❏When storing the printer, be sure that it is level:
do not store it on an angle, on end, or upside down.
Notes on handling ink cartridges
Note the following points when handling ink
cartridges to maintain good print quality.
❏Extra ink is required to fully charge the print head
nozzles the first time the printer is used;
replacement cartridges will be needed earlier than
usual.
❏Store ink cartridges at room temperature in a
location that is not exposed to direct sunlight.
❏To ensure print quality, use all the ink in the
cartridge before the earlier of the following dates:
❏The expiry date shown on the ink cartridge
packaging
❏Six months after opening the package of ink
cartridge
❏If you move ink cartridges from a cold place to a
warm place, leave them at room temperature for
more than 18 hours before using them so the
temperature of the ink can reach room
temperature.
❏Do not touch the ink cartridge IC chip. You may
not be able to print properly.
❏Do not leave the printer without ink cartridges
installed. The ink in the printer will dry out and
the printer will not function as expected. Leave
ink cartridges installed even when the printer is
not in use.
❏Because the green IC chip contains the cartridge's
own information such as the remaining ink level,
you can still reinstall and use the ink cartridge
after removing it from the printer.
SC-F10000H Series/SC-F10000 Series User's Guide
Introduction
34
… 34 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson SC-F10000 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson SC-F10000 series in the language / languages: English as an attachment in your email.

The manual is 7.28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson SC-F10000 series

Epson SC-F10000 series User Manual - German - 241 pages

Epson SC-F10000 series User Manual - Dutch - 228 pages

Epson SC-F10000 series User Manual - French - 237 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info