771806

Epson SC-F10000 series Manual

33
Zoom out
Zoom in
Previous page
1/224
Next page
Notes on Usage and
Storage
Installation space
North American and Latin American users: Contact
your dealer for product installation. The product must
be installed by an authorized dealer. Damage to the
product from unauthorized installation will not be
covered by your Epson warranty.
Make sure that you secure the following space, clear of
any other objects, so that paper ejection and
consumable replacement are not obstructed.
See the “Specifications Table” for the external
dimensions of the printer.
U “Specifications Table” on page 214
W
SC-F10000H Series: 6008 mm (236.54 in.)
SC-F10000 Series: 5607 mm (199.48 in.)
Notes when using the printer
Note the following points when using this printer to
avoid breakdowns, malfunctions, and print quality
decline.
❏When using the printer, observe the operating
temperature and humidity range described in the
“Specifications Table”.
U “Specifications Table” on page 214
Note, however, that the desired results may not be
achieved if the temperature and humidity are
within the limits for the printer but not within
those for the media. Be sure the operating
conditions suit the media. For more information,
see the documentation supplied with the media.
Also, when operating in dry areas, air conditioned
environment, or under direct sunlight, maintain
the appropriate humidity.
❏Avoid using the printer in locations with heat
sources or that are exposed to direct draughts
from ventilators or air conditioners. The print
head nozzles could dry out and clog.
❏Do not bend or tug the waste ink tube. Ink could
spill inside or around the printer.
❏Maintenance such as cleaning and replacement
must be performed according to usage frequency
or at recommended intervals. Failure to perform
regular maintenance could result in loss of print
quality. In the absence of the appropriate
maintenance, continued use could damage the
print head.
U “Cleaning” on page 103
❏The print head may not be capped (the print head
may not return to the left side) if the printer is
turned off when the media is jammed or an error
has occurred. Capping is a function for
automatically covering the print head with a cap
(lid) to prevent the print head from drying out. In
this case, turn on the power and wait a while until
capping is performed automatically.
❏When the power is on, do not remove the power
plug or cut the power at the breaker. The print
head may not be capped properly. In this case,
turn on the power and wait a while until capping
is performed automatically.
❏When Maintenance Cleaning is On, the print
head is automatically cleaned at a fixed interval
after printing to keep the nozzles from clogging.
Be sure that the Waste Ink Bottle is placed
whenever the printer is on.
❏As well as being expended during printing, ink is
used during head cleaning and other maintenance
required to keep the print head in working order.
❏To ensure the colors you want to print, maintain a
constant room temperature of 18 to 28 °C (64.4 to
82.4 °F).
SC-F10000H Series/SC-F10000 Series User's Guide
Introduction
33
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson SC-F10000 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson SC-F10000 series in the language / languages: English as an attachment in your email.

The manual is 7.28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson SC-F10000 series

Epson SC-F10000 series User Manual - German - 241 pages

Epson SC-F10000 series User Manual - Dutch - 228 pages

Epson SC-F10000 series User Manual - French - 237 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info