511906
169
Zoom out
Zoom in
Previous page
1/198
Next page
Maintenance and Troubleshooting
12-5
A
B
12
configured and that the Base I/O port address and the
Interrupt Request Number (IRQ) assigned to the port
are not in conflict with any other devices.
Check the port setting in your Windows Control panel.
You may need to set your port to a faster speed, lower
the FIFO buffer size (advanced serial port
configuration), or adjust the speed in your software. See
Chapter 8 for more information.
If you’re using a Macintosh and the camera is sharing a
serial port with another device, turn AppleTalk off.
Make sure you don’t have both Image Expert and
EPSON Photo!2 open at the same time.
You get a “Camera Connection Failed” error message when
you’re using your PhotoPC 700 software with the camera
connected to your computer.
Make sure the cable is connected correctly as described
in Chapter 4. Also make sure your camera is turned on
and set to “View,” the shutter is open, and the batteries
have power.
Check the serial port settings in your Image Expert or
EPSON Photo!2 software. You may need to change the
Port and Speed serial connection settings to Auto.
If you were able to use the camera with the computer
previously and then changed or added other settings on
your system, you may have a COM port conflict. Try
using a different COM port or reconfiguring the COM
port settings. (See your Windows documentation for
instructions.) If you were not able to use the camera
with your computer previously, you may have an
inoperable serial cable. Try using another cable.
Avoid opening or working with other software
applications while the camera and computer are
communicating.
You are unable to drag and drop photos into a document.
If you’re using Windows 3.1, this method of getting
pictures into your documents may not be reliable. Try
importing or using copy and paste.
trouble.fm Page 5 Friday, May 15, 1998 3:28 PM
169


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson PhotoPC 700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson PhotoPC 700 in the language / languages: English as an attachment in your email.

The manual is 6,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info