511905
134
Zoom out
Zoom in
Previous page
1/158
Next page
9-6
Maintenance and Troubleshooting
If your system has less than 16MB RAM, the transfer
speed may be slow. Try using virtual memory. See your
computer documentation or system help for more
information.
If you’re transferring pictures via the serial cable, check
the port speed setting in your Windows Control panel.
See your Windows documentation or help system for
more information.
Your system hangs or crashes when you disconnect the
JumpShot USB cable or remove the USB CompactFlash
card from it.
Always close the
PhotoPC650 folder, exit any open
applications, and (in Windows) select
Eject in Explorer
before disconnecting the USB cable or removing the
card from the cable. On a Macintosh, be sure to drag the
card icon into the
Trash folder first—don’t use the
Eject command in the Special menu. See page 4-6
(Windows) or page 4-8 (Macintosh) for instructions.
TIP
If you’re using the JumpShot USB cable to transfer pictures, it’s a
good idea to check Lexar Media’s web site periodically for
possible updates to your USB CompactFlash card and JumpShot
USB cable drivers. Access www.lexarmedia.com for details.
Your notebook computer can’t access an ATA-compatible
CompactFlash card inserted with a PCMCIA adapter.
If you’re using an IBM Thinkpad,
call IBM for
technical support or follow these steps to download and
install an updated driver from IBM:
1 Download the files from ftp://ftp.pc.ibm.com/pub/
pccbbs/mobiles/yptf$049.exe and unzip them to a
blank 1.44MB diskette.
2 Make sure your PC Card driver says PCIC or
compatible PCMCIA controller on IBM
System
in the Control Panel/System/Device
Manager. Then select Update Driver/Have Disk
and refer the system to A: for all missing files.
If your PC Card driver says
PCIC or compatible
PCMCIA controller
, go to Update Driver in the
Device Manager and select
PCIC or compatible
PCMCIA controller on IBM System
.
3 Insert the CompactFlash card with a PCMCIA
adapter. The system should prompt for a driver.
Select
OK to use the Windows default ESDI/IDE
HDD Controller
driver. A folder appears on the
desktop with a drive letter assigned to the card.
134


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson PhotoPC 650 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson PhotoPC 650 in the language / languages: English as an attachment in your email.

The manual is 11,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info