511905
133
Zoom out
Zoom in
Previous page
1/158
Next page
Maintenance and Troubleshooting
9-5
A
B
If youre using a Windows system and have trouble
connecting to the COM port, check the computer’s
COM port settings. Make sure the port is properly
configured and that the Base I/O port address and the
Interrupt Request Number (IRQ) assigned to the port
are not in conflict with any other devices. Also check the
port setting in your Windows Control panel. You may
need to set your port to a faster speed or lower the FIFO
buffer size (advanced serial port configuration).
If you see a low memory error message when transferring
pictures via the serial cable, close the EPSON
PhotoPC 650 TWAIN or Plug-In window and use the
Save to Folder method to transfer your pictures
instead. See page 4-15 for instructions. (You may also
need to close and then reopen your application software
to free-up your computers memory.)
You are unable to drag and drop photos into a document.
If your system has less than 16MB RAM, you may not
be able to use drag and drop. Make sure you don’t run
too many applications at the same time. You may need
to add memory to your system or use another method of
getting photos into your documents.
Your application may not support drag and drop.
You are unable to copy and paste or import your photo into
a document on your Macintosh.
Try increasing your virtual memory using the Memory
Control Panel. Also increase the memory allocation for
your word processor or other application. (Select the
application and choose
Get Info from the File menu.)
Try turning off any unnecessary extensions. See your
Macintosh documentation for more information.
The pictures transfer to your computer too slowly.
The fastest way to transfer your pictures is via the
JumpShot USB cable. If you must use the serial cable,
use the
Save to Folder method instead of transferring
the pictures into your applications. See Chapter 4 for
instructions.
If you’re transferring via the serial cable, make sure you
selected a fast transfer rate in the EPSON PhotoPC 650
TWAIN or Plug-In software. Click the
Setup tab and
change the speed setting to
115230 (for Windows) or
230400 (for Macintosh). If your system won’t support
these faster speeds, select the next lower speed.
133


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson PhotoPC 650 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson PhotoPC 650 in the language / languages: English as an attachment in your email.

The manual is 11,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info