771289
27
Zoom out
Zoom in
Previous page
1/35
Next page
Connecting to Wi-Fi or Ethernet
Cannot connect to network
Is the message “The combination of IP address and subnet mask is invalid.” displayed?
Solution 1: If your broadband router (or access point) uses a DHCP function, set the TCP/IP setting so that the
product acquires an IP address automatically.
Solution 2: If you want to set the product’s IP address manually, see the following to set the IP address and subnet
mask.
1. Check the IP address for the broadband router (or access point) connected to your computer. See the broadband
router’s (or access point’s) user’s guide.
2. All IP addresses are written in segments of four numerical values. In the final segment, set a unique numerical
value for your product within a range of 1 to 254. (When the router is a DHCP server or when there is another
DHCP server in the network, set a value that does not conflict with the ID address range allocated by the DHCP
server.)
Setting example:
IP address for the broadband router: 192.168.1.1
Example setting on the product: 192.168.1.3
For the subnet mask, 255.255.255.0 is normally set for small-scale networks and all devices in the network use this
value. Also, when a gateway value is set, use the same value as the IP address for the wireless router.
Does your computer have more than one network interface?
The scanner may not be able to communicate with computers that have multiple network interfaces. To
communicate with the scanner, disable all network interfaces on your computer except for the interface
connected to the scanner.
When using TCP/IP, can the computer and product communicate?
Verify that a connection is established. See “Ping command” on page 23.
When using TCP/IP, is the IP address set correctly for your environment?
The factory setting is not available as is. To use this IP address, delete it once and reenter the same address. Change
the product’s IP address as appropriate for your environment.
The IP address changes
Is the TCP/IP setting on the control panel set to acquire an IP address automatically?
If the setting is auto, the IP address changes each time the router is turned on. When using the auto setting,
determine the power-on order, or always keep the product turned on. The auto setting is available when setting the
product port using EpsonNet Print (in Windows) or Bonjour printing (in Mac OS X).
Printing Problems
Computer Connected to Wi-Fi
Cannot perform network printing
Are the network connection settings correct?
See “Setup Problems” on page 24 for more details on problems with network connection settings.
Network Guide
Troubleshooting
27
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson Guide Reseau at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson Guide Reseau in the language / languages: English as an attachment in your email.

The manual is 0.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson Guide Reseau

Epson Guide Reseau User Manual - German - 37 pages

Epson Guide Reseau User Manual - Dutch - 37 pages

Epson Guide Reseau User Manual - French - 37 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info