215219
16
Zoom out
Zoom in
Previous page
1/100
Next page
14-Function list
Configuration Menus
fSetting menu
Sub menu Function
Screen Position Moves the image display position vertically and horizontally.
Press the [e] button and adjust the display area on the Position adjustment screen which
is displayed.
Zoom
Caption
Adjustment is possible only when the Zoom aspect function has been selected.
Vertical size : You can adjust the vertical size of the image.
Zoom Position: You can adjust the vertical movement of the display position.
Keystone Corrects vertical keystone distortion in the image.
The projected image changes when keystone correction is carried out.
If the images become uneven in appearance after keystone correction has been carried
out, decrease the sharpness setting.
Projection Front : Image is displayed, as is. No vertical/horizontal reversal performed.
Front/Ceiling: The image is displayed vertically reversed.
Rear : The image is displayed horizontally reversed.
Rear/Ceiling : The image is displayed vertically and horizontally reversed.
Setup Level You can select one of two preset black levels.
(When the image source is an NTSC Video/S-Video signal, or when the image source has
been set to Input A, "Component".)
Operation Sleep Mode Sets the energy saving option for when no signal is being input.
When a Sleep Mode interval has been set, the projector will enter Sleep Mode when no
operation has been carried out for the set time (5, 10 and 30 minutes). Projection will shut
down and the projector enters a standby state after cooling down. (The power indicator
lights orange).
Projection starts again when the [Power] button is pressed on the projector's contol panel
or the remote control.
Child Lock Sets child lock to ON or OFF.
When child lock is set to "ON", the power will not come on unless you press and hold the
[Power] button on the control panel for at least 3 seconds. (The remote control functions as
normal.)
On Screen
Display
Message When set to "OFF", messages such as "No Signal.", and the name of the selected input
source or colour mode will no longer be displayed. Warning messages such as "Replace the
lamp" will continue to be displayed.
Background
Color
Sets the background colour to black or blue.
Startup
Screen
Sets whether or not the "EPSON" logo will be displayed during projector startup.
Input
Signal
Video
Signal
Selects the colour system of the video signal being input.
(Changes in signal format will only be noticeable when the input source is Video/S-Video.)
Input A You can switch between the sources connected to Input A.
Component: YCbCr
g/YPbPrg
RGB-Video: SCART
g, Sync on Green
Volume Adjusts the volume setting
Language Selects the language in which on-screen messages are displayed.
Press the [e] button and select the desired language from the list which is displayed.
Reset Resets all the adjustment values within the "Setting" menu (except for "Child Lock",
"Input A" and "Language") to their default settings.
Press the [e] button and select "Yes" on the confirmation screen which is displayed.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson emp tw10h lcd projector at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson emp tw10h lcd projector in the language / languages: English as an attachment in your email.

The manual is 9,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson emp tw10h lcd projector

Epson emp tw10h lcd projector User Manual - English, German, French - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info