215208
14
Zoom out
Zoom in
Previous page
1/16
Next page
Adapters
(commercially-
available)
Computer
cable or
VGA-HD15
PC cable
(accessory or
optional)
RGB video
cable
(commercially-
available)
Component
video cable
(commercially-
available)
S- Video
cable
(commercially-
available)
RCA video
cable
(commercially-
available)
(RCA pin jack (yellow))
To video
output port
(Mini DIN 4-pin)
To S-Video
output port
(RCA pin jack × 3
(red, green, blue))
To component video
output ports
(3BNC)
To RGB
output ports
(Mini D-Sub 15-pin)
To RGB
output port
To audio
output port
RCA audio cable
(commercially-
available)
Audio cable
(accessory)
To audio output port
Connecting to video
equipment
Lamp cover is
open error./
Lamp timer
failure/Lamp out
Fan related error
/
Sensor error
Internal error
Red
Red
Red
Red
Red
Red
Red
(Temperature) indicator
(Lamp) indicator
(Operation) indicator
Disconnect the power cable from the electrical outlet.
Then contact your dealer or the nearest address provided in the "International Warranty
Conditions" section of the
Safety Instructions/World Wide Warranty Terms
booklet.
Check if the lamp is broken.
Disconnect the power plug from the electrical outlet and wait for the lamp to cool down
sufficiently (takes about one hour) before checking.
User's Guide "Replacing the Lamp"
User's Guide
"Reading the Indicators"
The projector is provided with indicators to notify you of
the operating status of the projector.
The following tables show what the indicators mean
and how to remedy the problems that they indicate.
If the indicator is flashing or lit red
Problem/Warning
Reading the indicators
lit flashing off
If the problem is still not solved after the lamp is
replaced, stop using the projector and disconnect
the power cable from the electrical outlet. Then
contact your dealer or the nearest address
provided in the "International Warranty Conditions"
section of the
Safety Instructions/World Wide
Warranty Terms
booklet.
Replace the
lamp and
then turn the
power on.
If the lamp
still does not
turn on,
replace it with
a new lamp.
Contact your local dealer for further advice.
If the lamp is
not broken
If the lamp is
broken
The [Audio] port to use is
the port that is in the same
box as the port being used
to input the video signals.
* An accessory audio cable
is not supplied with the
EMP-9300. Use a
commercially-available
audio cable instead.
9300E-QRG_02-13
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson emp 8300 lcd projector at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson emp 8300 lcd projector in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info