214266
43
Zoom out
Zoom in
Previous page
1/141
Next page
42
Turning the Projector OnTurning the Projector On
User’s Guide
TIP
• You can cancel Quick Setup operation at any time by pressing the [Esc]
button on either the remote control or the projector's control panel.
• When Auto Quick Corner detects a "frame" (detecting 3 or more
sides, or top and bottom sides, or 2 adjacent sides) within the
projection area, it automatically corrects the image so that it fits
within the "frame" at an aspect ratio of 4:3. The "frame" means the
borders of the screen, whiteboard or blackboard.
When 3 or more sides
are detected
When top and bottom sides,
or 2 adjacent sides are detected
*1 *2
The Auto Quick Corner works properly by doing the following beforehand.
*1 When the "Projection" menu is set to "Front", adjust the projection area so
that the top edge of the screen frame is inside the area.
*2 When the "Projection" menu is set to "Front/Ceiling", adjust the projection
area so that the bottom edge of the screen frame is inside the area.
• When running Auto Quick Corner, always be sure to adjust so that
the top edge of the screen is inside the projection area. If the top edge
of the screen is outside the projection area, correction will not be
carried out correctly.
• Auto Quick Corner can provide effective correction when the
borders of the projection surface stand out clearly, such as a white
screen with black borders. If the borders of the projection area do
not stand out clearly, correction may not be carried out correctly. If
projecting onto a surface such as a blackboard, drawing a white box
with chalk as a border, or attaching a sheet of paper as projection
area may help the correct adjustment.
• Auto Quick Corner can be used to carry out correction within the
ranges given below. If the distortion is outside these ranges,
correction will not be carried out correctly.
Furthermore, if the image is distorted both vertically and
horizontally or if the zoom has been adjusted to "W", the correction
range will become narrower than the angles given below.
· When correcting to within a border
Vertically: Approx. 40°Horizontally: Approx. 20°
· When projecting onto a surface without a border
Vertically: Approx. 45°Horizontally: Approx. 15°
When no border
is detected
When the frame is
horizontally long
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson emp 830 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson emp 830 in the language / languages: English as an attachment in your email.

The manual is 11,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info