214266
42
Zoom out
Zoom in
Previous page
1/141
Next page
41
Turning the Projector OnTurning the Projector On
User’s Guide
PROCEDURE
Press the [Quick Setup] button on either the remote
control or the projector's control panel.
The message "The Quick Setup is in preparation" will be
displayed and the zoom is adjusted to wide automatically.
If projecting onto a screen, whiteboard or blackboard, adjust the
projection area so that it fits within the borders of the screen or
board.
If projecting onto a wall surface without using a projection
screen, blackboard or whiteboard, adjust the projection area to
the desired position and size.
Press the [Quick Setup] button once more.
Adjustment of the projection area will start.
A screen such as that shown below will appear while
adjustment is in progress, but this is normal.
TIP
• You can use the "Quick Setup Options" in the configuration menu
to set which functions are carried out when the [Quick Setup] button
is pressed.
Default setting: Auto Focus and Auto Quick Corner are carried out.
Wall Shot is not carried out.
s"Setting" - "Quick Setup" - "Quick Setup Options" p.81
• "Wall Shot" can also be carried out separately by pressing the [Wall
Shot] button on either the remote control or the projector's control
panel. sp.53
• When Quick Setup is used, the adjusted state will be memorised even
after the projector's power is turned off. If you are using the
projector in a single location all the time, you only need to carry out
Quick Setup once, and from then on you do not need to adjust the
projection area.
• Quick Setup cannot be used when the "Projection" configuration
menu is set to "Rear" or "Rear/Ceiling".
1
Projection area
Borders
2
(While Auto Focus is
being carried out)
(While Auto Quick Corner
is being carried out)
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson emp 830 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson emp 830 in the language / languages: English as an attachment in your email.

The manual is 11,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info