214749
105
Zoom out
Zoom in
Previous page
1/165
Next page
104
Monitoring and Controlling Projectors via a Network (for the EMP-7900)
User’s Guide
Connection of the projector will start, and the following
Setup for Network Projector window will be displayed.
If "DHCP" is set to "OFF", the settings for the "Network"
function in the "Advanced2" menu will be displayed. Make any
changes that are necessary.
The projector name can consist of up to 15 single-byte
alphanumeric characters. Hyphens(-) also can be used. Note
that a numeric-only name can not be set.
Once the network settings for the projector have been
completed, click [Mail Notification Setting] and make
the settings for mail notification such as the
notification destinations.
The following Setup of mailing functions window will
be displayed.
The following table shows the setting details for each item.
Mail
Notification
function
Set to "ON" to use the mail notification function.
IP address
g of
SMTP server
Specify an IP address of the SMTP server.
You can enter numbers from 0 to 255 in each field of the
IP address. However, the following IP address cannot be
used.
127.x.x.x, 224.0.0.0 to 255.255.255.255
(where x is a number between 0-255)
When you change a port number of the SMTP server,
specify this port number. The default value is "25".
You can enter a valid number from 1 to 65535.
Destination
address
1/2/3
Specify the destination address of the notification mail.
Up to three destinations can be set. You can enter up to
53 single-byte alphanumeric characters.
The address you have set as "Destination address 1" is
also used as the source address.
Setting a
Notification
Event
Use this to select the events that cause a mail notification
to be sent when a problem or warning occurs with the
projector.
You can select one or more of the following.
• Internal error • Fan related error.Sensor error
• Lamp timer failure • Lamp out • Lamp cover is
open
• Internal temperature error
• High-speed cooling in progress
• Lamp replacement notification •No-signal
105


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson emp 7950nl at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson emp 7950nl in the language / languages: English as an attachment in your email.

The manual is 9,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info